Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

E32-T11NF

Oil-resistant Fiber Unit

E32-T11NF

Fiber Units for Reliable, Stable Operation in Cutting Oil Environments

about this Product Family

Through-beam Fiber Units

Type Sensing
direction
Appearance
(mm)
Bending
radius
of cable
Sensing distance (mm) Optical
axis
diameter
(minimum
sensing
object)
Model
E3X-HD E3NX-FA
Oil-
resistant
Right-
angle
3057_lu_1_1
*1
IP68G
Flexible,
R1
GIGA: 4,000 *2
HS: 4,000 *2
ST: 4,000 *2
SHS: 2,200
GIGA: 4,000 *2
HS: 4,000 *2
ST: 4,000 *2
SHS: 2,200
4 dia.
(0.1 dia./
0.03 dia.)
E32-T11NF 2M

*1. The IP68G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP68 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil.
Passed OMRON's Oil-resistant Component Evaluation Standards (OMRON's own durability evaluation standards)
(Cutting oil type: specified in JIS K 2241:2000; Temperature: 35 °C max.)
*2. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm.
Note:
1. The following mode names and response times apply to the modes given in the Sensing distance column.
[E3X-HD] GIGA: Giga-power mode (16 ms), HS: High-speed mode (250 μs), ST: Standard mode (1 ms), and SHS: Super-high-speed mode (NPN output: 50 μs, PNP output: 55 μs)
[E3NX-FA] GIGA: Giga-power mode (16 ms), HS: High-speed mode (250 μs), ST: Standard mode (1 ms), and SHS: Super-high-speed mode (30 μs)
2. The values for the minimum sensing object are reference values that indicate values obtained in standard mode with the sensing distance and sensitivity set to the optimum values. The first value is for the E3X-HD and the second value is for the E3NX-FA.

Combined Fiber Amplifier Units

Series E3X-HD Series E3NX-FA Series
Appearance 3057_lu_2_1
3057_lu_2_2
Output 1 output 1 or 2 outputs (depending on the model)
External input Not supported Supported or not supported (depending on the model)
Response time * 50 μs (55 μs)/250 μs/1 ms/16 ms
(Default: 250 μs)
30 μs (32 μs)/250 μs/1 ms/16 ms
(Default: 250 μs)

Note: The Fiber Amplifier Units are not oil resistant.
* These are the response times for super-high-speed mode (SHS), high-speed mode (HS), standard mode (ST), and GIGA-power mode (GIGA).
The value in parentheses for the super-high-speed mode is for a model with a PNP output.