KM50-E

• Use M3.5 crimp terminals.
• The mounting panel must be 1 to 8 mm thick.
• When mounting KM50-E Power Monitors side by side, provide sufficient space between them.
  Reference separation: 120 mm (vertical), 60 mm (horizontal)
  Both of these are distances from the center of the Power Monitor.
• Make sure that the rated ambient temperature of the KM50-E Power Monitor is not exceeded when more than one Power Monitor is mounted.

• Use only the CTs and CT Cable specified by OMRON.
• If any other CTs or CT Cables are used, normal measurements will not be possible.
• The Special CTs have polarity.
  Connect the Special CT correctly, connecting the 1S or 3S terminal on the Power Monitor to the k terminal on the CT and the 1L or 3L terminal on the Power Monitor to the l terminal on the CT.
• Do not ground the Special CTs. Failure may occur.

Rated primary current of 5 A: KM20-CTF-5A
Rated primary current of 50 A: KM20-CTF-50A
Rated primary current of 100 A: KM20-CTF-100A
Rated primary current of 200 A: KM20-CTF-200A
Rated primary current of 400 A: KM20-CTF-400A
Rated primary current of 600 A: KM20-CTF-600A

KM20-CTF-CB3 (3 m)