CompoNet Peripheral Devices CompoNet Peripheral Devices/Lineup | OMRON Bangladesh by Kyoto Engineering & Automation

Name	Appearance	Specification	Model	Standards
Flat Cable I		4-conductor flat cable (UL2555) Length: 100 m Conductor diameters: 0.75 mm² × 2, 0.5 mm² × 2	DCA4-4F10	---

Note: Also can be used with general-purpose round cable I (VCTF 2-conductor cable).

Name	Specification	Model	Stand- ards
Flat Connector Socket	Use this Connector in a set with a DCN4-BR4 Flat Connector Plug for the following applications. Extending the trunk line or a sub-trunk line T-branching from the trunk line or a sub-trunk line T-branching a sub-branch line from a branch line	DCN4-TR4 *	---
Flat Connector Socket	Use this Connector independently for the following applications. Used when connecting a DCN4-TM4 Terminating Resistor to the end of the trunk line or a sub-trunk line.	DCN4-TR4 *
Flat Connector Plug	Use this Connector in a set with a DCN4-TR4 Flat Connector Socket for the following applications. Extending the trunk line or a sub-trunk line T-branching from the trunk line or a sub-trunk line T-branching a sub-branch line from a branch line	DCN4-BR4 *
Flat Connector Plug	Use this Connector independently for the following applications. Connecting Communications Cable to a Unit Connecting Communications Cable to a DCN4-MD4 Multidrop Connector (when a multidrop connection is used)	DCN4-BR4 *
Multidrop Connector	Use Multidrop Connectors for multi-drop wiring of Slave Units or Repeater Units to trunk lines, sub-trunk lines, or branch lines.	DCN4-MD4 *
Multidrop Connector Plug	Connecting Communications Cable to a Unit in a multidrop connection This connector can be used with the following Units:Bit Slave Units with Compact Connectors (CRT1B-[]D0[]JS(-1))	DCN4-MR4
Terminating Resistance	This is a Connector-type Terminating Resistor for Flat Cable I or Round Cable II. It is connected to a DCN4-TR4 Flat Connector Socket at the end of a trunk line or sub-trunk line.	DCN4-TM4 *
Special Tools	This is the crimping tool for the following connectors: DCN4-TR4(-1) Flat Connector Socket DCN4-BR4 Flat Connector Plug DCN4-BR4D Conversion Connector for Standard Thin Cable and Flat Cable DCN4-SF4D Connector for Flat Cable	DWT-A01

Note: Multidrop Connectors (DCN4-MD4) are not connectable with Bit Slave Units with Compact Connectors, Use
Multidrop Connector Plugs (DCN4-MR4) instead.
* The minimum quantity packaged is 10 Connectors. Order the Connectors in multiples of 10.

Name	Appearance	Application	Model	Stand- ards
Open Type Connector (for connecting Units)		Converts the Unit's communications connector into a screw terminal block to enable connecting round cable to a Slave Unit or Repeater Unit.	DCN4-TB4 *	---
Terminating Resistor		This is a Terminal Block-type Terminating Resistor for Round cable I or Round cable II. It is connected to the end of a trunk line or sub-trunk line round cable.	DRS1-T	U

Note: The DCN4-TB4 Multidrop Connector cannot be used with Bit Slaves with Compact Connectors. Use Open Type
Connector (for Unit connection) HCN-TB4LMZG+ from Honda Tsushin Kogyo Co., Ltd. Tel:+81-52-242-2111
* The minimum quantity packaged is 10 Connectors. Order the Connectors in multiples of 10.

Name	Application	Model	Stand- ards
Open Type Connector (for connecting Units)	Converts the Unit's communications connector into a screw terminal block to enable connecting round cable to a Slave Unit or Repeater Unit.	DCN4-TB4 *	---
Flat Connector Socket	Use this Connector in a set with a DCN4-BR4 Flat Connector Plug for the following applications. Extending the trunk line or a sub-trunk line T-branching from the trunk line or a sub-trunk line T-branching a sub-branch line from a branch line	DCN4-TR4 *
Flat Connector Socket	Use this Connector independently for the following applications. Used when connecting a DCN4-TM4 Terminating Resistor to the end of the trunk line or a sub-trunk line.	DCN4-TR4 *
Terminating Resistance	This is a Connector-type Terminating Resistor for Flat Cable I or Round cable II. It is connected to a DCN4- TR4 Flat Connector Socket at the end of a trunk line or sub-trunk line.	DCN4-TM4 *
Terminating Resistance	This is a Terminal Block-type Terminating Resistor for Round cable I or Round cable II. It is connected to the end of a trunk line or sub-trunk line round cable.	DRS1-T
Special Tools	This is the crimping tool for the following connectors: DCN4-TR4(-1) Flat Connector Socket DCN4-BR4 Flat Connector Plug DCN4-BR4D Conversion Connector for Standard Thin Cable and Flat Cable DCN4-SF4D Connector for Flat Cable	DWT-A01

Note: The DCN4-TB4 Multidrop Connector cannot be used with Bit Slaves with Compact Connectors. Use Open Type
Connector (for Unit connection) HCN-TB4LMZG+ from Honda Tsushin Kogyo Co., Ltd. Tel:+81-52-242-2111
* The minimum quantity packaged is 10 Connectors. Order the Connectors in multiples of 10.

Name	Appearance	Application	Model	Stand- ards
Mounting Bracket	---	Unit with e-CON Connectors: For CRT1-V[]D08S(-1)/VAD04S/ VDA02S	CRT1-ATT02	---
		Unit with MIL Connectors: For CRT1-V[]D016ML(-1)/VAD04ML/ VDA02ML	CRT1-ATT01
		Unit with MIL Connectors: For CRT1-V[]D32ML(-1)	SRT2-ATT02
		Bit Slaves with Compact Connectors: For CRT1B-[]D02JS(-1), CRT1B-[]D04JS(-1)	CRT1-ATT03

CompoNet Peripheral Devices

Communications Cables, Terminating Resistance, Connector, Mounting Bracket, Special Tools

Communications Cables

For Flat Cable I

For Round Cable I

For Round Cable II

Mounting Bracket

Product Category