Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

H7BX

Multifunction Counter (DIN 72 × 72)

H7BX

DIN 72×72 mm Multifunction Counter with a Bright,Easy-to-view, Negative Transmissive LCD.

about this Product Family

Ratings

Model H7BX-A/AD1 H7BX-AW/AWD1
Type Preset counter Preset counter/tachometer
Supported configurations 1-stage preset counter, total and
preset counter *1 (selectable)
1-stage preset counter, 2-stage preset
counter, total and preset counter (*1),
batch counter, dual counter, tachometer
(selectable)
Ratings Power supply voltage
*2
• 100 to 240 VAC (50/60 Hz)
• 24 VAC (50/60 Hz)/12 to 24 VDC (ripple 20% max.)
Operating voltage
range
85% to 110% of rated supply voltage (90% to 110% at 12 VDC)
Power consumption H7BX-A/AW: 9.6 VA max. (100 to 240 VAC)
H7BX-AD1/AWD1: 8 VA max. (24 VAC), 5.3 W max. (12 to 24 VDC)
Mounting method Flush mounting
External connections Screw terminals
Degree of protection IP54 (front section only)
Input signals CP1, CP2, reset 1, reset 2, key protection
Counter Max. counting speed 30 Hz or 5 kHz (selectable, ON/OFF ratio 1:1), setting for both CP1 and CP2
Input modes Increment, decrement, command (UP/DOWN A), individual (UP/DOWN B),
quadrature (UP/DOWN C)
Output modes N, F, C, R, K-1, P, Q, A, K-2, D, L N, F, C, R, K-1, P, Q, A, K-2, D, L, H
One-shot output time 0.01 to 99.99 s
Reset input External reset (minimum reset input signal width: 1 ms or 20 ms selectable),
manual reset, and automatic reset (internal according to C, R, P, and Q mode
operation)
Tachometer Pulse measurement
method
--- Periodic measurement (Sampling period:
200 ms)
Max. counting speed --- 30 Hz or 10 kHz (selectable)
Measuring ranges --- 30 Hz: 0.01 to 30.00 Hz
10 kHz: 0.01 Hz to 10 kHz
Measuring accuracy --- ±0.1% FS ±1 digit max. (at 23 ±5°C)
Output modes --- Upper and lower limits, area, upper limit,
lower limit
Auto-zero time --- 0.1 to 99.9 s
Startup time --- 0.0 to 99.9 s
Average processing --- OFF/2/4/8 times
Prescaling function Yes (0.001 to 99.999)
Decimal point adjustment Yes (rightmost 3 digits)
Sensor waiting time 290 ms max. (Control output is turned OFF and no input is accepted during
sensor waiting time.)
Key protection input Response speed: Approx. 1 s
No-voltage NPN input (fixed)
Short-circuit (ON) impedance: 1 kΩ max. (Leakage current at 0 Ω: Approx.
12 mA)
Short-circuit (ON) residual voltage: 3 V max.
Open (OFF) impedance: 100 kΩ min.
Input method
(except key protection input)
No-voltage NPN input or voltage PNP input (selectable)
No-voltage input
Short-circuit (ON) impedance: 1 kΩ max. (Leakage current at 0 Ω: Approx.
12 mA)
Short-circuit (ON) residual voltage: 3 V max.
Open (OFF) impedance: 100 kΩ min.
Voltage input
High level: 4.5 to 30 VDC
Low level: 0 to 2 VDC
Input resistance: Approx. 4.7 kΩ
External power supply 12 VDC (±10%), 100 mA (For details, refer to External Power Supply on Data
Sheet.)
Control output Contact output: 3 A at 250 VDC/30 VDC, resistive load (cosφ = 1)
Minimum applied load: 10 mA at 5 VDC (Failure level: P, reference value)
Transistor output: 100 mA max. at 30 VDC max.
Residual voltage: 1.5 VDC max. (approx. 1 V)
Leakage current: 0.1 mA max.
Display *3 Backlit 7-segment negative transmissive LCD
Character Heights
PV: 13.5 mm (red/green)
SV: 9 mm (green)
Digits 6 digits
-99,999 to 999,999 (5 digits
negative and 6 digits positive)
6 digits
Counter: -99,999 to 999,999 (5 digits
negative and 6 digits positive)
Tachometer: 0 to 999,999 (6 digits)
Memory backup EEPROM (Overwrites: 100,000 min.), Data storage: 10 years min.
Ambient operating temperature -10 to 55°C (with no icing)
Ambient storage temperature -25 to 65°C (with no icing)
Ambient operating humidity 25 to 85°C (with no condensation)
Case color Black (N1.5)
Accessories Two flush-mounting adapters,
terminal cover
Two flush-mounting adapters, terminal
cover, DIP switch setting stickers

*1. The total and preset counter functions as a 1-stage preset counter and total counter.
*2. Do not use an inverter output for the power supply.
*3. Displayed only when the power is ON. Not displayed when the power is OFF.

Characteristics

Insulation resistance 100 MΩ min. (at 500 VDC) between current-carrying terminal and exposed
non-current-carrying metal parts, and between non-continuous contacts
Dielectric strength Between current-carrying metal parts and non-current-carrying metal parts:
2,000 VAC, 50/60 Hz for 1 min
Between power supply and input circuit: 2,000 VAC, 50/60 Hz for 1 min
(for models other than the H7BX-A[]D1)
1,000 VAC, 50/60 Hz for 1 min (H7BX-A[]D1)
Between control output, power supply, and input circuit: 2,000 VAC, 50/60 Hz for 1 min
Between non-continuous contacts: 1,000 VAC, 50/60 Hz for 1 min
Impulse withstand voltage Between power terminals: 3.0 kV (1.0 kV for 24 VAC/12 to 24 VDC models)
Between current-carrying terminal and exposed non-current-carrying metal parts:
4.5 kV (1.5 kV for 24 VAC/12 to 24 VDC models)
Noise immunity Between power terminals: ±1.5 kV
Between input terminals: ±600 V
Square-wave noise by noise simulator (Pulse width: 100 ns/1 μs, 1-ns rise)
Static immunity Malfunction: 8 kV
Destruction: 15 kV
Vibration resistance Destruction: 10 to 55 Hz, 0.75-mm single amplitude, 2 hours each in three directions
Malfunction: 10 to 55 Hz, 0.50-mm single amplitude, 10 minutes each in three directions
Shock resistance Destruction: 294 m/s2 3 times each in 6 directions
Malfunction: 98 m/s2 3 times each in 6 direction
Life expectancy Mechanical: 10,000,000 operations min.
Electrical: 100,000 operations min. (3 A at 250 VAC/30 VDC, resistive load) *
Weight Approx. 250 g

* Check the electrical life expectancy curve.

Electrical Life Expectancy (Reference Values)

Resistive Load

H7BX Specifications 6

Inductive Load

H7BX Specifications 7

A current of 0.15 A max. can be switched at 125 VDC (cosφ = 1) and current of 0.1 A max. can be switched with L/R = 7 m/s. In both cases, a life of 100,000 operations can be expected.

Applicable Standards

Approved
safety
standards
cURus: UL 508, CSA C22.2 No. 14
EN 61010-1 (IEC 61010-1): Pollution degree 2/overvoltage category II;
EN 61326; VDE 0106 Part 100
EMC (EMI) EN 61326-1 *
Emission Enclosure: EN 55011 Group 1 class A
Emission AC mains: EN 55011 Group 1 class A
(EMS) EN 61326-1 *
Immunity ESD: EN 61000-4-2: 4 kV contact discharge; 8 kV air discharge
Immunity RF-interference: EN 61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz); 10 V/m (Pulse-
modulated, 900 MHz ±5 MHz)
Immunity Conducted Disturbance: EN 61000-4-6: 3 V (0.15 to 80 MHz)
Immunity Burst: EN 61000-4-4: 2 kV power-line; 1 kV I/O signal-line
Immunity Surge: EN 61000-4-5: 1 kV line to lines (power and output lines (relay outputs)); 2 kV line to
ground (power and output lines (relay outputs))
Immunity Voltage Dip/Interruption: EN 61000-4-11: 0.5 cycle, 100% (rated voltage)

* Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)

I/O Functions

Using as a Counter *1

Inputs CP1, CP2 (1) All Modes Except for Dual Counter Mode
Reads count signals.
Increment, decrement, up/down (command, individual, or quadrature) inputs can be used.
(2) Dual Counter Mode
Reads CP1 count signals on CP1 input and CP2 count signals on CP2 input.
Increment signals can be used.
Reset or
Reset 1
(1) All Modes Except for Dual Counter Mode
Resets present value and outputs (OUT2 when using the batch counter). *2
Counting cannot be performed while resetting or when reset 1 input is ON.
The reset indicator is lit while the reset input is ON.
(2) Dual Counter Mode
Resets the CP1 present value to 0.
Counting the CP1 input cannot be performed while the reset 1 input is ON.
The reset indicator is lit while the reset 1 input is ON.
Total Reset
or Reset 2
The reset operation depends on the selected function. *3
Outputs OUT1, 2 When the corresponding set value is reached, signals are output according to the designated output mode.

*1. Refer to Data Sheet for information on the operation of input and output functions.
*2. In increment mode or increment/decrement mode, the present value returns to 0; in decrement mode, the present
       value returns to the set value with 1-stage models, and returns to set value 2 with 2-stage models.
*3. The reset indicator will not be lit when the total reset or reset 2 input is ON.

Function Reset operation
1-stage/2-stage preset counter Does not operate (Not used).
Total and preset counter Resets the total count value.
Holds the total count value at 0 while the total reset input is ON.
Batch counter Resets the batch count value and batch output (OUT1).
Holds the batch count value at 0 while the reset 2 input is ON.
Dual counter Resets the CP2 present value.
Counting for CP2 input is disabled while the reset 2 input is ON.

Using as a Tachometer

Inputs CP1, CP2 Reads counting signals. (CP2 input is not available.)
Reset 1,
Reset 2
Holds the measurement value and outputs. (Reset 2 input is not available.)
The reset indicator is lit during hold.
Outputs OUT1, 2 Outputs signals according to the specified output mode when a set value is reached.

Using as a Counter or Tachometer

Key protection input Prohibits using the keys on the front panel.
Set the key protection level in function selection mode.
Key protection is enable by short-circuited key protection terminals.

Note: For details, refer to Data Sheet.