Item | Specification |
---|---|
Model | CRS1-RPT01 |
Communications ports | Upstream port (port 1): Ttrunk line or sub-trunk line Downstream port (port 2): Sub-trunk line (Can be wired with the same communications specifications as the Master Unit.) Different types of communications cable can be connected to the upstream and downstream ports. |
Maximum number of layers | Up to two extra segment layers can be created from the Master Unit. |
Number of nodes per network (per Master Unit) |
64 nodes |
Number of nodes per trunk line or sub-trunk line |
32 nodes (Including Slave Units) |
Communications power supply connector |
One downstream communications port power supply connector Note: Communications power for the Repeater Unit is supplied from the BS+ and BS- terminals on the upstream port communications connector (PORT1). |
Communications power supply connector allowable current capacity |
5 A max. |
Noise immunity | Conforms to IEC 61000-4-4 2 kV (power line). |
Vibration resistance | 10 to 150 Hz with double-amplitude of 0.7 mm or 50 m/s2 |
Shock resistance | 150 m/s2 |
Dielectric strength | 500 VAC (between isolated circuits) |
Insulation resistance | 20 MΩ min. (between isolated circuits) |
Ambient operating temperature | -10 to 55°C |
Ambient operating humidity | 25% to 85% (with no condensation) |
Ambient operating atmosphere | No corrosive gases |
Storage temperature | -25 to 65°C |
Storage humidity | 25% to 85% (with no condensation) |
Installation | DIN Track or M4 screws |
Weight | 73 g |
Communications power supply voltage | 14 to 26.4 VDC |
Communications power supply current consumption |
95 mA max. |