Power supply voltage | 24 VDC | ||
---|---|---|---|
Allowable voltage range | 85% to 110% of the rated power supply voltage | ||
Power consumption | Approx. 3 W | ||
Sensor input | Thermocouple: K, J, T, E, L, U, N, R, S, B
Infrared temperature sensor (ES1B series): 10 to 70°C, 60 to 120°C, 115 to 165°C, 140 to 260°C Voltage input: 0 to 50 mV |
||
Platinum resistance thermometer: Pt100, JPt100 | |||
Control output | Voltage output
(for driving SSR) |
Output voltage: 12 VDC ±15% (PNP);
Maximum load current: 21 mA; Equipped with short-circuit protection circuit |
|
Transistor output | Maximum operational voltage: 30 VDC;
Maximum load current: 100 mA; Residual voltage: 1.5 V max.; Leakage current: 0.4 mA max. |
||
Current output | Current output range: 4 to 20/0 to 20 mA DC;
Load: 350 Ω max. *2 |
||
Auxiliary output | Transistor output | Sourcing | Maximum operating voltage: 30 VDC;
Maximum load current: 50 mA; Residual voltage: 1.5 V max.; Leakage current: 0.4 mA max. |
Sinking | |||
Linear voltage output | Voltage output range: 1 to 5/0 to 5 VDC;
Load: 10 kΩ min. |
||
Event input | Contact output | ON: 1 kΩ max., OFF: 100 kΩ min.
Discharge current: Approx. 7 mA |
|
Non-contact
output |
ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.
Discharge current: Approx. 7 mA |
||
Number of input and
control points |
Input points: 2, Control points: 2 | ||
Setting method | Via communications or using the Setting Display Unit (E5ZN-SDL) | ||
Control method | 2-PID or ON/OFF control | ||
Other functions | Heater burnout detection function, transfer output function
Multi-SP and RUN/STOP switching using event input |
||
Ambient operating
temperature |
-10 to 55℃ (with no icing or condensation)
For 3 years of assured use: -10 to 50℃ |
||
Ambient operating
humidity |
25% to 85% | ||
Storage temperature | -25 to 65℃ (with no icing or condensation) |