CJ1W-INT01

CJ-series Interrupt Input Units

CJ1W-INT01

High-speed Starting of I/O Interrupt Tasks. Use Up to Two Units for a Total of Up to 32 Interrupt Inputs. This unit is available for CJ/NJ controller.

Item list of CJ1W-INT01

about this Product Family

Inquiry of this Product

last update: September 24, 2012

International Standards

The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
Contact your OMRON representative for further details and applicable conditions for these standards.

Interrupt Input Units

Unit type: CJ1 Basic I/O Units
No. of words allocated: 1 word
Standards: UC1, N, L, CE

Product name	Specifications						Current consumption (A)		Model
Product name	I/O points	Input voltage current	Commons	Input pulse width conditions	Max. Units mountable per Unit	External connection	5 V	24 V	Model
Interrupt Input Unit	16 inputs	24 VDC, 7 mA	16 points, 1 common	ON time: 0.05 ms max. OFF time: 0.5 ms max.	2	Removable terminal block	0.08	---	CJ1W-INT01

Note: 1. Can be used only on CPU Racks, and not on Expansion Racks.
2. The locations where the Units can be mounted depend on the CPU Rack and the CPU Unit model.
CJ2H-CPU6[]-EIP: From the slot next to the CPU Unit until the fourth slot.
CJ1G, CJ1H: From the slot next to the CPU Unit until the fifth slot.
CJ1M: From the slot next to the CPU Unit until the third slot.
3. With the SYSMAC NJ-series Controllers,Interrupt Input Units can be used as normal Basic Input Units. They
cannot be used to start I/O interrupt tasks.

Accessories

There is no accessory for the CJ series Interrupt Input Units.

last update: September 24, 2012

Product Category

Automation Systems
- Programmable Controllers
  - CJ1
    - Basic I/O Units
      - CJ1W-ID / IA
      - CJ1W-OC / OA / OD
      - CJ1W-MD
      - CJ1W-INT01
      - CJ1W-IDP01
      - CJ1W-B7A

Top of Page