Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

EST2-2C-MV4

CX-Thermo Support Software Ver. 4.[]

EST2-2C-MV4

Monitoring/Setting Support Software for General-purpose temperature adjustment controller. Temperature Controllers Enabling Faster Parameter Setup, Device Adjustment, and Maintenance.

about this Product Family

Compatible
devices
Temperature
Controllers
E5GN * (available from Sep. 2009)
E5CN (available from April 2004)
E5EN,E5AN(available from February 2005),
E5CN-H, E5EN-H, E5AN-H
E5CN-HT, E5EN-HT, E5AN-HT
E5ER, E5AR
E5ER-T, E5AR-T
E5GC, E5CC, E5CC-B, E5CC-U, E5EC, E5EC-B, E5AC, E5DC
E5CC-T, E5EC-T, E5AC-T
E5ZN
EJ1N-TC4, EJ1N-TC2, EJ1N-HFU
EJ1G-TC4, EJ1G-TC2, EJ1G-HFU
G3ZA (only when connected to EJ1N-TC4, EJ1N-TC2, EJ1G-TC4, EJ1G-TC2)
G3PW (only when connected to EJ1N-TC4, EJ1N-TC2)
Note: Models with DeviceNet communications are not supported.
Personal
computer
system
requirements
OS OS: Microsoft Windows XP (Service Pack 3 or higher), Vista, 7, 8 or 10
CPU: A processor recommended by Microsoft
Memory: A memory recommended by Microsoft
CPU 300 MHz min.
Memory 128 MB min.
Harddisk 300 MB min. available space
CD-ROM One CD-ROM drive min.
Monitor XGA (1024 × 768), High Color 16 bit min.
Communications
ports
• RS-232C port, or USB port, 1 port min.
Connection method • An E58-CIFQ1 USB-Serial Conversion Cable is required to connect a computer to the setup tool port the E5[]N, E5[]N-H, E5[]N-HT, or EJ1.
• An E58-CIFQ2 USB-Serial Conversion Cable is required to connect a computer to the setup tool port the E5GC, E5CC, E5CC-B, E5CC-U, E5EC, E5EC-B, E5AC, E5DC, E5CC-T, E5EC-T, or E5AC-T
• A K3SC Interface Converter is used to connect a computer to models with RS-422/RS-485 communications.
• An E58-CIFIR USB-Infrared Conversion Cable is required to wirelessly connect a computer to models with infrared communications (E5EN-H/EN-HT or E5AN-H/AN-HT).

* Production will be discontinued in March 2015.