Sensing method |
Reflective model (for mark detection) | ||||
---|---|---|---|---|---|
Model | E3C-VS1G | E3C-VS3R | E3C-VM35R | E3C-VS7R | |
Sensing distance | 10±2 mm | 30±5 mm | 35±5 mm | 7±10 mm | |
Minimum detectable object (black mark on white) |
0.7 mm at central sensing distance |
2 mm at central sensing distance |
0.2 mm at central sensing distance |
0.6 mm at central sensing distance |
|
Light source (wavelength) |
Green LED (565 nm) | Red LED (680 nm) | Red LED (660 nm) | ||
Ambient illumination | Incandescent lamp: 1,000 lx max. (on light-receiving side) Sunlight: 3,000 lx max. (on light-receiving side) |
||||
Ambient temperature range |
Operating: - 10 to 70 ° C (with no icing or condensation) Storage: - 25 to 70 ° C (with no icing or condensation) |
Operating/storage: -25 to 70°C (with no icing or condensation) |
|||
Ambient humidity range |
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) | ||||
Insulation resistance | 20 MΩ min. (at 500 VDC) | ||||
Dielectric strength | 500 VAC, 50/60 Hz for 1 min | ||||
Vibration resistance (destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
Shock resistance (destruction) |
500 m/s2 3 times each in X, Y, and Z directions | ||||
Degree of protection | IEC IP64 (indoors only) | IEC IP50 (indoors only) | |||
Connection method | Pre-wired cable (standard length: 2 m) | ||||
Weight (packed state) |
Approx. 50 g | Approx. 60 g | |||
Material | Case | Polycarbonate | Heat-resistant ABS | ||
Lens | Polycarbonate | Glass | |||
Mounting Bracket |
--- | Steel | |||
Accessories | Instruction manual | Mounting Bracket, Slotted/Phillips screws M3 × 16, Spring washer, Flat washer, M3 nuts |
Mounting Bracket, Slotted/Phillips screws M3 × 16, Spring washer, Flat washer, M3 nuts, Instruction manual |