Item list of M2P
Note: Use a panel thickness of 0.5 mm for tab terminals #110 and solder terminals.
Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
M2P
Indicators
Large Rectangular-bodied Indicators
about this Product Family
Related Contents
- Push Buttons / Indicator Lamps
- Features
- Lineup
- Specifications
- Dimensions
- Catalog
last update: November 12, 2012
Caution: All units are in millimeters unless otherwise indicated.
M2PJ (Rectangular) Models
M2PA (Square) Models
M2PT (Round) Models
Accessory Mounting Dimensions
Dimensions for mounting accessories are the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P.
Panel Cutout
M2PJ (Rectangular) Models
Note: 1. n: Number of Units
2. Recommended panel thickness: 1 to 5 mm
3. Mount the panel before mounting the Switch Guard.
4. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the
coating.
2. Recommended panel thickness: 1 to 5 mm
3. Mount the panel before mounting the Switch Guard.
4. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the
coating.
M2PA (Square) Models
Note: 1. n: Number of Units
2. Recommended panel thickness: 1 to 5 mm
3. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the
coating.
2. Recommended panel thickness: 1 to 5 mm
3. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the
coating.
M2PT (Round) Models
Note: 1. Recommended panel thickness: 1 to 5 mm
2. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the
coating
2. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the
coating
last update: November 12, 2012
Top of Page