Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Z-10FWY-B
General-purpose Basic Switch
Image
General-purpose, Hinge lever (63.5 R, Stainless steel lever, low OF), Snap action, Self-reset type, Split-contact type, SPDT, Screw terminal (M4)
| Actuator |
Hinge lever (63.5 R, Stainless steel lever, low OF) |
|---|---|
| Sensitivity |
Standard sensitivity |
| Contact form |
SPDT |
| Terminal |
Screw terminal (M4) |
| Rated current |
10A |
| Degree of protection |
General type IEC60529 (JEM): IP00 |
- Ratings/Performance
As of August 8, 2016
| Actuator | Hinge lever (63.5 R, Stainless steel lever, low OF) |
|---|---|
| Sensitivity | Standard sensitivity |
| Operation type | General type |
| Operating mechanism | Snap action |
| Switching mechanism | Self-reset type |
| Contact method | Split-contact type |
| Contact form | SPDT |
| Contact gap | 1.0 mm |
| Terminal | Screw terminal (M4) |
| Load | General load |
| Rated current | 10A |
| Ratings (AC) Non-Inductive load | Rated voltage: 125 VAC / Resistive load: 10 A(NC) 10 A(NO) / Lamp load: 4 A(NC) 2 A(NO) (Series connection) Rated voltage: 250 VAC / Resistive load: 10 A(NC) 10 A(NO) / Lamp load: 2.5 A(NC) 1.5 A(NO) (Series connection) Rated voltage: 125 VAC / Resistive load: 6 A(NC) 6 A(NO) / Lamp load: 3 A(NC) 1.5 A(NO) (Parallel connection) Rated voltage: 250 VAC / Resistive load: 6 A(NC) 6 A(NO) / Lamp load: 2.5 A(NC) 1.25 A(NO) (Parallel connection) |
| Ratings (AC) Inductive load | Rated voltage: 125 VAC / Inductive load: 6 A(NC) 6 A(NO) / Motor load: 5 A(NC) 2.5 A(NO) (Series connection) Rated voltage: 250 VAC / Inductive load: 6 A(NC) 6 A(NO) / Motor load: 3 A(NC) 1.5 A(NO) (Series connection) Rated voltage: 125 VAC / Inductive load: 4 A(NC) 4 A(NO) / Motor load: 4 A(NC) 2 A(NO) (Parallel connection) Rated voltage: 250 VAC / Inductive load: 4 A(NC) 4 A(NO) / Motor load: 2 A(NC) 1 A(NO) (Parallel connection) |
| Ratings (DC) Non-Inductive load | Rated voltage: 30 VDC / Resistive load: 10 A(NC) 10 A(NO) / Lamp load: 4 A(NC) 2 A(NO) (Series connection) Rated voltage: 125 VDC / Resistive load: 1 A(NC) 1 A(NO) / Lamp load: 1 A(NC) 1 A(NO) (Series connection) Rated voltage: 250 VDC / Resistive load: 0.6 A(NC) 0.6 A(NO) / Lamp load: 0.6 A(NC) 0.6 A(NO) (Series connection) Rated voltage: 30 VDC / Resistive load: 6 A(NC) 6 A(NO) / Lamp load: 4 A(NC) 2 A(NO) (Parallel connection) Rated voltage: 125 VDC / Resistive load: 0.6 A(NC) 0.6 A(NO) / Lamp load: 0.6 A(NC) 0.6 A(NO) (Parallel connection) Rated voltage: 250 VDC / Resistive load: 0.3 A(NC) 0.3 A(NO) / Lamp load: 0.3 A(NC) 0.3 A(NO) (Parallel connection) |
| Ratings (DC) Inductive load | Rated voltage: 30 VDC / Inductive load: 6 A(NC) 6 A(NO) / Motor load: 6 A(NC) 3 A(NO) (Series connection) Rated voltage: 125 VDC / Inductive load: 0.1 A(NC) 0.1 A(NO) / Motor load: 0.1 A(NC) 0.1 A(NO) (Series connection) Rated voltage: 250 VDC / Inductive load: 0.05 A(NC) 0.05 A(NO) / Motor load: 0.05 A(NC) 0.05 A(NO) (Series connection) Rated voltage: 30 VDC / Inductive load: 4 A(NC) 4 A(NO) / Motor load: 6 A(NC) 3 A(NO) (Parallel connection) Rated voltage: 125 VDC / Inductive load: 0.1 A(NC) 0.1 A(NO) / Motor load: 0.1 A(NC) 0.1 A(NO) (Parallel connection) Rated voltage: 250 VDC / Inductive load: 0.05 A(NC) 0.05 A(NO) / Motor load: 0.05 A(NC) 0.05 A(NO) (Parallel connection) |
| Ratings explanation | Lamp load has an inrush current of 10 times the steady-state current. Inductive load has a power factor of 0.4 Min. (AC) and a time constant of 7 ms Max. (DC). Motor load has an inrush current of 6 times the steady-state current. The ratings of 8 VDC and 14 VDC is the same as that of 30 VDC. |
| Inrush current | NC: 40 A NO: 20 A |
| Ambient temperature | Operating : -25 to +80 ℃ Storage : -25 to 80 ℃ （ with no icing or condensation ） |
| Ambient humidity | Operating: 35 to 85%RH Storage: 35 to 85%RH |
| Speed of permissible operation | 2.2 mm/s to 1000 mm/s |
|---|---|
| Permissible operating frequency （Mechanically） | 240 operations / 1 minute Max. |
| Permissible operating frequency （Electrically） | 20 operations / 1 minute Max. |
| Contact resistance | 25 mΩ (Initial value. Measuring method is voltage drop method at 1 A, 6 to 8 VDC.) |
| Insulation resistance | Between each terminal of the same polarities: 100 MΩ min. Between live-metallic part and ground: 100 MΩ min. Between each terminal and non-live-metallic part: 100 MΩ min. (at 500 VDC Megger, with separator) |
| Dielectric strength | Between each terminal of the same polarities: 1500 V min. Between live-metallic part and ground: 2000 V min. Between each terminal and non-live-metallic part: 2000 V min. (50/60 Hz for 1 min, with separator) |
| Mechanical durability | 500,000 operations Min. |
| Electrical durability | 100,000 operations Min. (rating load) |
| Vibration resistance （Malfunction） | Vibration frequency range: 10 to 55 Hz, Double amplitude: 1.5 mm, Malfunction: 1 ms max. at the free position and the total travel position. |
| Shock resistance （Destruction） | 1,000 m/s**2 |
| Shock resistance （Malfunction） | Malfunction time is 1 ms Max. at the free position and the total travel position at 200 m/s**2. |
| Degree of protection | General type IEC60529 (JEM): IP00 |
| Mounting Method | Mounting with screw |
| Weight | Approx. 40 g |
| Release Force （RF） | Standard value 0.14 N min. |
|---|---|
| Pre-Travel （PT） | Reference value 10 mm max. |
| Over-Travel （OT） | Standard value 5.6 mm min. |
| Movement Differential （MD） | Standard value 2.4 mm max. |
| Free Position （FP） | Standard value 29.8 mm max. |
| Operating Position （OP） | Standard value 18.2 to 19.8 mm |
As of August 8, 2016
- Mounting holes
As of August 8, 2016
Screw mounting hole dimensions
As of August 8, 2016
- Type of terminal and form
As of August 8, 2016
As of August 8, 2016
- Terminals
As of August 8, 2016
接点構成図
As of August 8, 2016
- Applicable load diagram
As of August 8, 2016
As of August 8, 2016
about this Product
Top of page