Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Z-01H-B
General-purpose Basic Switch
Image
General-purpose, Pin plunger (2.3 dia., Stainless steel plunger), Snap action, Self-reset type, Single-Pole, Double-Throw type, SPDT, Screw terminal (M4)
| Actuator |
Pin plunger (2.3 dia., Stainless steel plunger) |
|---|---|
| Sensitivity |
High sensitivity |
| Contact form |
SPDT |
| Terminal |
Screw terminal (M4) |
| Rated current |
0.1A |
| Degree of protection |
General type IEC60529 (JEM): IP00 |
- Ratings/Performance
As of August 8, 2016
| Actuator | Pin plunger (2.3 dia., Stainless steel plunger) |
|---|---|
| Sensitivity | High sensitivity |
| Operation type | General type |
| Operating mechanism | Snap action |
| Switching mechanism | Self-reset type |
| Contact method | Single-Pole, Double-Throw type |
| Contact form | SPDT |
| Contact gap | 0.25 mm |
| Terminal | Screw terminal (M4) |
| Load | Micro load |
| Rated current | 0.1A |
| Ratings (AC) Non-Inductive load | Rated voltage: 125 VAC / Resistive load: 0.1 A(NC) 0.1 A(NO) |
| Ratings (DC) Non-Inductive load | Rated voltage: 8 VDC / Resistive load: 0.1 A(NC) 0.1 A(NO) Rated voltage: 14 VDC / Resistive load: 0.1 A(NC) 0.1 A(NO) Rated voltage: 30 VDC / Resistive load: 0.1 A(NC) 0.1 A(NO) |
| Ratings explanation | The values indicate the steady-state current. |
| Inrush current | NC: 0.1 A NO: 0.1 A |
| Ambient temperature | Operating : -25 to +80 ℃ Storage : -25 to 55 ℃ （ with no icing or condensation ） |
| Ambient humidity | Operating: 35 to 85%RH Storage: 45 to 85%RH |
| Speed of permissible operation | 0.01 mm/s to 1000 mm/s |
|---|---|
| Permissible operating frequency （Mechanically） | 240 operations / 1 minute Max. |
| Permissible operating frequency （Electrically） | 20 operations / 1 minute Max. |
| Contact resistance | 50 mΩ (Initial value. Measuring method is voltage drop method at 0.1 A, 6 to 8 VDC.) |
| Insulation resistance | Between each terminal of the same polarities: 100 MΩ min. Between live-metallic part and ground: 100 MΩ min. Between each terminal and non-live-metallic part: 100 MΩ min. (at 500 VDC Megger) |
| Dielectric strength | Between each terminal of the same polarities: 600 V min. Between live-metallic part and ground: 2000 V min. Between each terminal and non-live-metallic part: 2000 V min. (50/60 Hz for 1 min) |
| Mechanical durability | 20,000,000 operations Min. |
| Electrical durability | 500,000 operations Min. (rating load) |
| Vibration resistance （Malfunction） | Vibration frequency range: 10 to 55 Hz, Double amplitude: 1.5 mm, Malfunction: 1 ms max. at the free position and the total travel position. |
| Shock resistance （Destruction） | 1,000 m/s**2 |
| Shock resistance （Malfunction） | Malfunction time is 1 ms Max. at the free position and the total travel position at 200 m/s**2. |
| Degree of protection | General type IEC60529 (JEM): IP00 |
| Mounting Method | Mounting with screw |
| Release Force （RF） | Standard value 0.78 N min. |
|---|---|
| Pre-Travel （PT） | Standard value 0.5 mm max. |
| Over-Travel （OT） | Standard value 0.13 mm min. |
| Movement Differential （MD） | Standard value 0.04 mm max. |
| Operating Position （OP） | Standard value 15.5 to 16.3 mm |
As of August 8, 2016
- Mounting holes
As of August 8, 2016
Screw mounting hole dimensions
As of August 8, 2016
- Type of terminal and form
As of August 8, 2016
As of August 8, 2016
- Terminals
As of August 8, 2016
接点構成図
As of August 8, 2016
- Applicable load diagram
As of August 8, 2016
As of August 8, 2016
about this Product
Top of page