E3JM-R4S4T

Built-in Power Supply Photoelectric Sensor

Page top

E3JM-R4S4T

Retro-reflective with M.S.R. function, Sensing distance 4m, Light-ON/Dark-ON selectable, DC SSR output, Terminal block models

Sensing method	Retro-reflective with M.S.R. function
Sensing distance	0m to 4m (When using the E39-R1)
Light source	Red LED
Control output (Output type)	DC SSR output
Connection method	Terminal block models

Item list of E3JM

Ratings/Performance
Dimensions
Output circuit
Parallel operating range

Ratings/Performance

As of September 9, 2016


Sensing method	Retro-reflective with M.S.R. function
Sensing distance	0m to 4m (When using the E39-R1)
Standard sensing object	Opaque 75 mm dia. Min.
Directional angle	Sensor: 1 to 5 DEG Reflector: 40 DEG Min.
Light source	Red LED
Power supply voltage	12 to 240 VDC -10% to 10% (ripple (p-p) 10% Max.) 24 to 240 VAC -10% to 10%
Power consumption	(DC) 2 W Max. (AC) 2W Max.
Control output (Output type)	DC SSR output
Control output (Load current)	0 to 100 mA
Control output (Residual voltage)	(DC) 2 V Max. (Load current 100mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	48 VDC Max.
Protective circuit	Surge suppressor
Response time	5 ms Max.
Sensitivity setting	Not equipped
Timer function	ON/OFF/One-shot delay0.1s to 5s
Ambient illuminance	Incandescent lamp: 3000 lux Max.
Ambient temperature	Operating: -25 to 55℃ Storage: -30 to 70℃ (with no icing or condensation)
Ambient humidity	Operating: 45 to 85% Storage: 35 to 95% (with no icing or condensation)
Insulation resistance	20 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength	2000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP66
Connection method	Terminal block models
Indicator	Operation indicator (red)
Tightening torque	2 N・m Max. (with M4 screw)
Material (case)	ABS
Material (lens)	Methacrylate resin
Material (cover)	Polycarbonate
Material (mounting bracket)	Iron
Accessories	Instruction manual, Mounting bracket, Nut, Terminal protection cover, One set of cable connection nuts, Reflector