Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
E3JM-R4S4
Built-in Power Supply Photoelectric Sensor
E3JM-R4S4
Retro-reflective with M.S.R. function, Sensing distance 4m, Light-ON/Dark-ON selectable, DC SSR output, Terminal block models
| Sensing method |
Retro-reflective with M.S.R. function |
|---|---|
| Sensing distance |
0m to 4m (When using the E39-R1) |
| Light source |
Red LED |
| Control output (Output type) |
DC SSR output |
| Connection method |
Terminal block models |
- Ratings/Performance
As of September 9, 2016
| Sensing method | Retro-reflective with M.S.R. function |
|---|---|
| Sensing distance | 0m to 4m (When using the E39-R1) |
| Standard sensing object | Opaque 75 mm dia. Min. |
| Directional angle | Sensor: 1 to 5 DEG Reflector: 40 DEG Min. |
| Light source | Red LED |
| Power supply voltage | 12 to 240 VDC -10% to 10% (ripple (p-p) 10% Max.) 24 to 240 VAC -10% to 10% |
| Power consumption | (DC) 2 W Max. (AC) 2W Max. |
| Control output (Output type) | DC SSR output |
| Control output (Load current) | 0 to 100 mA |
| Control output (Residual voltage) | (DC) 2 V Max. (Load current 100mA Max.) |
| Operation mode | Light-ON/Dark-ON selectable |
| Load power supply voltage | 48 VDC Max. |
| Protective circuit | Surge suppressor |
| Response time | 5 ms Max. |
| Sensitivity setting | Not equipped |
| Ambient illuminance | Incandescent lamp: 3000 lux Max. |
| Ambient temperature | Operating: -25 to 55℃ Storage: -30 to 70℃ (with no icing or condensation) |
| Ambient humidity | Operating: 45 to 85% Storage: 35 to 95% (with no icing or condensation) |
| Insulation resistance | 20 MOhm Min. at 500 VDC between charged parts and the case |
| Dielectric strength | 2000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP66 |
| Connection method | Terminal block models |
| Indicator | Light indicator (red) |
| Tightening torque | 2 N・m Max. (with M4 screw) |
| Material (case) | ABS |
| Material (lens) | Methacrylate resin |
| Material (cover) | Polycarbonate |
| Material (mounting bracket) | Iron |
| Accessories | Instruction manual, Mounting bracket, Nut, Terminal protection cover, One set of cable connection nuts, Reflector |
As of September 9, 2016
- Dimensions
As of September 9, 2016
As of September 9, 2016
- Output circuit
As of September 9, 2016
As of September 9, 2016
- Parallel operating range
As of September 9, 2016
As of September 9, 2016
about this Product
Top of page