Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

E3JM-10S4T-N

Built-in Power Supply Photoelectric Sensor

Page top

E3JM-10S4T-N

Through-beam, Sensing distance 10m, Light-ON/Dark-ON selectable, DC SSR output, Terminal block models

Sensing method Through-beam
Sensing distance 0m to 10m
Light source Infrared LED
Control output (Output type) DC SSR output
Connection method Terminal block models

Item list of E3JM

  • Ratings/Performance
Sensing methodThrough-beam
Sensing distance0m to 10m
Standard sensing objectOpaque 14.8 mm dia. Min.
Directional angleEmitter: 3 to 20 DEG
Receiver: 3 to 20 DEG
Light sourceInfrared LED
Power supply voltage12 to 240 VDC -10% to 10% (ripple (p-p) 10% Max.)
24 to 240 VAC -10% to 10%
Power consumptionEmitter and Receiver: (DC) 3 W Max.
Emitter and Receiver: (AC) 3W Max.
Control output (Output type)DC SSR output
Control output (Load current)0 to 100 mA
Control output (Residual voltage)(DC) 2 V Max. (Load current 100mA Max.)
Operation modeLight-ON/Dark-ON selectable
Load power supply voltage48 VDC Max.
Protective circuitSurge suppressor
Response time5 ms Max.
Sensitivity settingNot equipped
Timer functionON/OFF/One-shot delay0.1s to 5s
Ambient illuminanceIncandescent lamp: 3000 lux Max.
Ambient temperatureOperating: -25 to 55℃
Storage: -30 to 70℃
(with no icing or condensation)
Ambient humidityOperating: 45 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance20 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength2000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protectionIEC60529: IP66
Connection methodTerminal block models
IndicatorOperation indicator (red), Power indicator (red)
Tightening torque2 N・m Max. (with M4 screw)
Material (case)ABS
Material (lens)Methacrylate resin
Material (cover)Polycarbonate
Material (mounting bracket)Iron
AccessoriesInstruction manual, Mounting bracket, Nut, Terminal protection cover, One set of cable connection nuts
  • Output circuit

  • Parallel operating range

Short distance version

  • Setting distance

Series

Built-in Power Supply Photoelectric Sensor

E3JM

about this Product