Separate Amplifier Proximity Sensor with Adjustment Potentiometer
Sensing method |
Inductive type |
---|---|
Operation mode |
NO/NC selectable |
As of August 8, 2016
Sensing method | Inductive type |
---|---|
Power supply voltage | 12 to 24 VDC ripple(p-p) 10% Max. |
Operating voltage range | 10 to 30 VDC |
Current consumption | 45 mA max. |
Control output (Output type) | NPN open collector output |
Control output (Switching capacity) | 0 to 100 mA |
Control output (Residual voltage) | 0.8 V Max. |
Indicator | Detection indicator (red) |
Operation mode | NO/NC selectable |
Sensitivity setting | 1-turn adjustment |
Self-diagnostic output | - |
Protective circuit | Surge suppressor Output short-cut protection Power supply reverse polarity protection |
Ambient temperature | Operating: -10 to 55 ℃ Storage: -10 to 55 ℃ |
Ambient humidity | Operating: 35 to 85%RH Storage: 3585%RH |
Temperature influence | +/- 0.08%/CEL |
Voltage influence | +/- 2% Max. of sensing distance in rated voltage range +/- 20%. (As the basis for sensing distance at standard power voltage) |
Insulation resistance | 50 MOhm Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1000 VAC 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 100 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP20 |
Connection method | Pre-wired models(Cable length: 2 m) |
Weight (Packed state) | approx. 80 g |
Material (case) | Heat-resistant ABS resin |
Accessories | Caution labels, Mounting bracket, instruction manual |
Amplifier unit/sensor head of combination | E2C-X2AH |
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
Series
about this Product