Separate Amplifier Proximity Sensor with Adjustment Potentiometer
Sensing method |
Inductive type |
---|---|
Operation mode |
NO/NC selectable |
As of August 8, 2016
Sensing method | Inductive type |
---|---|
Differential distance | 10% Max. of sensing distance |
Power supply voltage | 12 to 24 VDC ripple(p-p) 10% Max. |
Operating voltage range | 10 to 30 VDC |
Current consumption | 25 mA max. |
Control output (Output type) | PNP voltage-current output |
Control output (Switching capacity) | 0 to 100 mA |
Control output (Residual voltage) | 1.5 V Max. |
Indicator | Detection indicator (red) |
Operation mode | NO/NC selectable |
Sensitivity setting | 4-turn adjustment |
Self-diagnostic output | - |
Protective circuit | Surge suppressor Output short-cut protection Power supply reverse polarity protection |
Ambient temperature | Operating: -10 to 55 ℃ Storage: -10 to 55 ℃ |
Ambient humidity | Operating: 35 to 85%RH Storage: 3585%RH |
Temperature influence | +/- 10% Max. of sensing distance in temperature range of -10 to +55 CEL (As the basis for sensing distance of 23 CEL) |
Voltage influence | +/- 1% Max. of sensing distance in rated voltage range +/- 20%. (As the basis for sensing distance at standard power voltage) |
Insulation resistance | 50 MOhm Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1000 VAC 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 25 Hz, 2-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 100 m/s**2 for 3 times each in X, Y, and Z directions |
Connection method | Terminal block models |
Weight (Packed state) | approx. 20 g |
Material (case) | Polycarbonate |
Accessories | Instruction manual |
Amplifier unit/sensor head of combination | E2C-CR8*/X1A/C1A/X1R5A |
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
Series
about this Product