Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
E2C-AK4A
Separate Amplifier Proximity Sensor with Adjustment Potentiometer
Image
Amplifier Unit, Inductive type, AC 2-wire models, Operation mode NO/NC selectable, Solid-state/ Relay output, Terminal block models
| Sensing method |
Inductive type |
|---|---|
| Operation mode |
NO/NC selectable |
- Ratings/Performance
As of August 8, 2016
| Sensing method | Inductive type |
|---|---|
| Differential distance | 1% to 5% of sensing distance |
| Response time | 20 ms Max. (Relay) |
| Power supply voltage | 100 to 240 VAC |
| Operating voltage range | 90 to 264VAC |
| Current consumption | 55 mA max. |
| Control output (Output type) | Solid-state/ Relay output |
| Control output (Switching capacity) | 0 to 50 mA(No-contact output) |
| Control output (Residual voltage) | 2 V Max. |
| Indicator | Detection indicator (red), Stability indicator (green) |
| Operation mode | NO/NC selectable |
| Sensitivity setting | 4-turn adjustment |
| Self-diagnostic output | - |
| Protective circuit | Surge suppressor Output short-cut protection |
| Ambient temperature | Operating: -10 to 55 ℃ Storage: -10 to 55 ℃ |
| Ambient humidity | Operating: 35 to 85%RH Storage: 3585%RH |
| Temperature influence | +/- 10% Max. of sensing distance in temperature range of -10 to +55 CEL (As the basis for sensing distance of 23 CEL) |
| Voltage influence | +/- 1% Max. of sensing distance in rated voltage range +/- 10%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | 50 MOhm Min. at 500 VDC between charged parts and the case |
| Dielectric strength | 1500 VAC 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 25 Hz, 2-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 100 m/s**2 for 3 times each in X, Y, and Z directions |
| Connection method | Terminal block models |
| Weight (Packed state) | approx. 250 g |
| Material (case) | Polycarbonate |
| Accessories | Instruction manual |
| Amplifier unit/sensor head of combination | E2C-CR8*/X1A/C1A/X1R5A/X2A/X5A/X10A/C20MA |
As of August 8, 2016
- Dimensions
As of August 8, 2016
As of August 8, 2016
- Output circuit
As of August 8, 2016
As of August 8, 2016
Series
about this Product
Top of page