Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
G3PA-450B-VD-2 DC12-24
Solid State Relays
Image
SCR output(heater control), Operating voltage: 12 to 24 VDC, SPST-NO, Output 50A 200 to 480 VAC, Zero cross function, Indicator, Screw
| Product classification |
Solid State Relay for heater control |
|---|---|
| Operating rated voltage |
12 to 24 VDC |
| Output form |
SPST-NO |
| Load voltage range |
180 to 528 VAC 50/60 Hz |
| Load current |
AC: 0.5 A to 50 A at 30 CEL |
| Zero cross function |
Equipped |
| Indicator |
Equipped |
| Terminal structure |
Screw |
- Ratings / Performance
As of September 9, 2016
| Product classification | Solid State Relay for heater control |
|---|---|
| Operating rated voltage | 12 to 24 VDC |
| Operating voltage range | 9.6 to 30 VDC |
| Must operate voltage | 9.6VDC max. |
| Must release voltage | 1VDC min. |
| Isolation | Phototriac |
| Output form | SPST-NO |
| Rated load voltage | 200 to 480VAC 50/60 Hz |
| Load voltage range | 180 to 528 VAC 50/60 Hz |
| Load current | AC: 0.5 A to 50 A at 30 CEL |
| Inrush current resistivity | AC: 440 A (60 Hz, 1 cycle) |
| Output ON voltage drop | 1.8 V (RMS) |
| Leakage current | 20 mA (at 480 VAC) |
| Ambient temperature | Operating: -30 to 80 ℃ Storage: -30 to 100 ℃ (_with no icing or condensation) |
| Ambient humidity | Operating: 45 to 85%RH (_with no icing or condensation) |
| Operate time | 1/2 cycle of load power source + 1 ms Max. |
| Release time | 1/2 cycle of load power source + 1 ms Max. |
| Protection for output | Varistor and Snubber |
| Zero cross function | Equipped |
| Indicator | Equipped |
| Insulation resistance | Between input to output: 100 MΩ at 500 VDC Between heat sink to input/output terminals: 100 MΩ at 500 VDC |
| Dielectric strength | Between input to output: 4000 V Between heat sink to input/output terminals: 4000 V |
| Vibration resistance | 10 to 55 to 10 Hz, 0.375 mm single amplitude (0.75 mm double amplitude) in each 3 directions for 2 hours (mounted on DIN track) |
| Shock resistance | 300 m/s**2, in each 6 directions 3 times |
| Terminal structure | Screw |
| Terminal strength(Clamp torque) | Input terminal: M3.5: 0.75 to 1.18 N.m Output terminal: M5: 1.57 to 2.45 N.m |
| Mounting | Panel (DIN track) |
| Weight | Approx.900 g |
As of September 9, 2016
- Dimensions
As of September 9, 2016
Mounting holes
As of September 9, 2016
- Connection diagram
As of September 9, 2016
Terminal arrangement and internal connection
As of September 9, 2016
- Characteristic figure
As of September 9, 2016
Input voltage vs. input current
Input voltage vs. input impedanceE00000676970.gif
Load current-ambient temperature
Inrush current resistivity (Non-repetitive) (The dotted line is a repetition. Keep the inrush current below the values shown by the dotted line if it occurs repetitively.)
As of September 9, 2016
about this Product
Top of page