Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
G3HD-X03S-VD DC4-24
Solid State Relays G3[]-VD
Image
Transistor output, Operating voltage: 4 to 24 VDC, SPST-NO, Output 3A 4 to 48 VDC, Plug-in
| Product classification |
Relay compatible Solid State Relay |
|---|---|
| Operating rated voltage |
4 to 24 VDC |
| Output form |
SPST-NO |
| Load voltage range |
3 to 52.8 VDC |
| Load current |
DC: 0.1 A to 3 A at 40 CEL |
| Indicator |
Not equipped |
| Terminal structure |
Plug-in |
- Ratings / Performance
As of September 9, 2016
| Product classification | Relay compatible Solid State Relay |
|---|---|
| Operating rated voltage | 4 to 24 VDC |
| Operating voltage range | 3 to 28 VDC |
| Input impedance | 1.5 kOhm+20% -10% |
| Must operate voltage | 3VDC max. |
| Must release voltage | 1VDC min. |
| Isolation | Photocoupler |
| Output form | SPST-NO |
| Rated load voltage | 4 to 48VDC |
| Load voltage range | 3 to 52.8 VDC |
| Load current | DC: 0.1 A to 3 A at 40 CEL |
| Inrush current resistivity | DC: 18 A (10 ms) |
| Output ON voltage drop | 1.6 V |
| Leakage current | 5 mA (at 50 VDC) |
| Ambient temperature | Operating: -30 to 80 ℃ Storage: -30 to 100 ℃ (_with no icing or condensation) |
| Ambient humidity | Operating: 45 to 85%RH (_with no icing or condensation) |
| Operate time | 0.5 ms Max. |
| Release time | 2 ms Max. |
| Protection for output | Diode |
| Indicator | Not equipped |
| Insulation resistance | Between input to output: 100 MΩ at 500 VDC |
| Dielectric strength | Between input to output: 1500 V |
| Vibration resistance | 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) in each 3 directions for 2 hours |
| Shock resistance | 1000 m/s**2, in each 6 directions 3 times |
| Terminal structure | Plug-in |
| Mounting | Socket |
| Weight | Approx.50 g |
As of September 9, 2016
- Dimensions
As of September 9, 2016
As of September 9, 2016
- Connection diagram
As of September 9, 2016
Terminal arrangement and internal connection
As of September 9, 2016
- Characteristic figure
As of September 9, 2016
Load current-ambient temperature
Inrush current resistivity (Non-repetitive) (The dotted line is a repetition. Keep the inrush current below the values shown by the dotted line if it occurs repetitively.)
As of September 9, 2016
Series
about this Product
Top of page