Grooved-type Photoelectric Sensor with Built-in Amplifier
Sensing method |
Grooved type through-beam |
---|---|
Sensing distance |
0mm to 25mm |
Light source |
Infrared LED |
Control output (Output type) |
NPN open collector output |
Connection method |
Pre-wired models (Cable length: 5 m) |
As of September 9, 2016
Sensing method | Grooved type through-beam |
---|---|
Sensing distance | 0mm to 25mm |
Standard sensing object | Opaque 1.5 mm dia. Min. |
Light source | Infrared LED |
Power supply voltage | 12 to 24 VDC -10% to 10% (ripple (p-p) 10% Max.) |
Current consumption | 25 mA DC Max. |
Control output (Output type) | NPN open collector output |
Control output (Load current) | 0 to 100 mA |
Control output (Residual voltage) | (DC) 1 V Max. (Load current 100mA Max.) |
Operation mode | Light-ON/Dark-ON selectable |
Load power supply voltage | 26.4 VDC Max. |
Protective circuit | Surge suppressor Power supply reverse polarity protection Mutual interference prevention |
Response time | 1 ms Max. |
Sensitivity setting | Not equipped |
Ambient illuminance | Incandescent lamp: 3000 lux Max., Sunlight: 10000 lux Max. |
Ambient temperature | Operating: -25 to 55℃ Storage: -40 to 70℃ (with no icing or condensation) |
Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation) |
Insulation resistance | 20 MOhm Min. at 500 VDC between lead wires and case |
Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between lead wires and case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP64 |
Connection method | Pre-wired models (Cable length: 5 m) |
Indicator | Operation indicator (orange) |
Tightening torque | 0.78 N・m Max. |
Material (case) | ABS |
Accessories | Instruction manual |
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
about this Product