Long-distance Photoelectric Sensor with Built-in Amplifier
Sensing method |
Distance-setting |
---|---|
Sensing distance |
0.2m to 2m (White paper 300 x 300 mm) |
Light source |
Infrared LED |
Control output (Output type) |
NPN/PNP open collector output |
Connection method |
Pre-wired models (Cable length: 2 m) |
As of September 9, 2016
Sensing method | Distance-setting |
---|---|
Sensing distance | 0.2m to 2m (White paper 300 x 300 mm) |
Setting range | 0.5 to 2m (White paper 300 x 300 mm) |
Spot size | 70 mm dia. Max. (At sensing distance of 1 m) |
Differential distance | 10% Max. of setting distance |
Reflectivity characteristic (black-white error) | -10% to 10% Max. (At setting distance of 1 m) |
Light source | Infrared LED |
Power supply voltage | 10 to 30 VDC (ripple (p-p) 10% included) |
Current consumption | 60 mA DC Max. |
Control output (Output type) | NPN/PNP open collector output |
Control output (Load current) | 0 to 100 mA |
Control output (Residual voltage) | (DC) 1.2 V Max. (NPN output, Load current 100mA Max.) (DC) 2 V Max. (PNP output, Load current 100mA Max.) |
Operation mode | Light-ON/Dark-ON selectable |
Load power supply voltage | 30 VDC Max. |
Protective circuit | Surge suppressor Output short-cut protection Power supply reverse polarity protection Mutual interference prevention |
Response time | 5 ms Max. |
Sensitivity setting | Teaching method |
Ambient illuminance | Incandescent lamp: 3000 lux Max., Sunlight: 10000 lux Max. |
Ambient temperature | Operating: -25 to 55℃ Storage: -30 to 70℃ (with no icing or condensation) |
Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation) |
Insulation resistance | 20 MOhm Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP67 |
Connection method | Pre-wired models (Cable length: 2 m) |
Indicator | Operation indicator (orange), Stability indicator (green) |
Tightening torque | 1.2 N・m Max. (with M4 screw) |
Material (case) | PBT |
Material (lens) | Methacrylate resin |
Material (cover) | Polyethyl sulfon |
Accessories | Instruction manual, Adjustment driver |
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
about this Product