E3Z-B61 0.5M

Compact Photoelectric Sensor with Built-in Amplifier

Image

Retro-reflective without M.S.R. function, Sensing distance 80 to 500mm, Light-ON/Dark-ON selectable, NPN output, Pre-wired models(0.5m)

Sensing method	Retro-reflective without M.S.R. function
Sensing distance	80mm to 500mm (When using the E39-R1S)
Light source	Red LED
Control output (Output type)	NPN open collector output
Connection method	Pre-wired models （Cable length: 0.5 m）

Item list of E3Z

Ratings/Performance
Dimensions
Output circuit
Parallel operating range

Ratings/Performance

As of September 9, 2016


Sensing method	Retro-reflective without M.S.R. function
Sensing distance	80mm to 500mm (When using the E39-R1S)
Standard sensing object	Transparent round PET bottle 500 ml 65 mm dia. Min.
Directional angle	Sensor: 2 to 10 DEG Reflector: 30 DEG Min.
Light source	Red LED
Power supply voltage	12 to 24 VDC -10% to 10% (ripple (p-p) 10% Max.)
Current consumption	30 mA DC Max.
Control output (Output type)	NPN open collector output
Control output (Load current)	0 to 100 mA
Control output (Residual voltage)	(DC) 1 V Max. (Load current: Less than 10mA) (DC) 2 V Max. (Load current: 10 to 100 mA)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	26.4 VDC Max.
Protective circuit	Surge suppressor Output short-cut protection Output short-circuit protection Power supply reverse polarity protection Mutual interference prevention
Response time	1 ms Max.
Sensitivity setting	Single-turn adjustment
Function	Remote control input
Ambient illuminance	Incandescent lamp: 3000 lux Max., Sunlight: 10000 lux Max.
Ambient temperature	Operating: -25 to 55℃ Storage: -40 to 70℃ (with no icing or condensation)
Ambient humidity	Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation)
Insulation resistance	20 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67
Connection method	Pre-wired models （Cable length: 0.5 m）
Indicator	Operation indicator (orange), Stability indicator (green)
Tightening torque	0.5 N・m Max. (with M3 screw)
Material (case)	PBT
Material (lens)	Denatured Polyarylate
Accessories	Instruction manual
Note	Degree of protection DIN 40050-9 standards: IP69K