Solid-state Timer
Rated supply voltage |
24 to 230VAC 50/60 Hz 24 to 48VDC ripple: 20% max. |
---|---|
Input signals |
Start |
Input method |
Voltage input |
Control output (Type) |
Relay output (SPDT) |
As of August 8, 2016
Rated supply voltage | 24 to 230VAC 50/60 Hz 24 to 48VDC ripple: 20% max. |
---|---|
Operating voltage range | 85% to 110% of rated supply voltage |
Input signals | Start |
Input method | Voltage input |
Voltage input | High (logic) level: 20.4 to 253 VAC/ 20.4 to 52.8 VDC Low (logic) level: 0 to 2.4 VAC/DC |
Minimum input signal width | 50 ms min. (Start input) |
Power consumption ( Relay ON ) | Approx. 14VA 2.2W (at 100 to 120 VAC) Approx. 32VA 3.0W (at 230 VAC) |
Power consumption ( Relay OFF ) | Approx.14VA 2.2W (at 100 to 120 VAC) Approx.32VA 3.0W (at 230 VAC) |
Reset voltage | 2.4 VDC/AC max. |
Number of time ranges | 7 |
Time ranges | 0.1s~1.2s / 1s~12s / 0.1min~1.2min / 1min~12min / 0.1h~1.2h / 1h~12h / 10h~120h |
Operating mode | ON delay, Flicker OFF start, Flicker ON start, Signal ON/OFF delay, Signal OFF delay, Interval, Signal ON/OFF delay, One shot output |
Control output (Type) | Relay output (SPDT) |
Control output (Contact output) | Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 30VDC 5A Minimum applicable load: 10 mA at 5 VDC (failure level: P) |
Ambient temperature | Operating: -10 to 55℃ Storage: -25 to 65℃ |
Ambient humidity | 使用時: 35~85% |
Accuracy of operating time | +/- 1% max.(FS) (+/- 1% +/- 10 ms max. in a range of 1.2 s) |
Setting error | -10 to 10% +/- 0.05 s max. (FS) |
Influence of voltage | +/- 0.7% FS max. (+/- 0.7% +/- 10 ms max. in a range of 1.2 s) |
Influence of temperature | +/- 5% FS max. (+/- 5% +/- 10 ms max. in a range of 1.2 s) |
Insulation resistance | 100 MΩ (at 500 VDC) |
Dielectric strength | 2000 VAC, 50/60 Hz for 1 min between control output terminals and operating circuit: 2000 VAC, 50/60 Hz for 1 min between non-continuous contacts: 1000 VAC, 50/60 Hz for 1 min |
Impulse withstand voltage | between power terminals: 5 kV between exposed non-current-carrying metal parts: 5 kV |
Noise immunity | +/- 1.5 kV (between power terminals), square-wave noise by noise simulator (pulse width: 100 ns/1 us, 1-ns rise) |
Static immunity | Mulfunction: 4 kV Destruction: 8 kV |
Vibration resistance (Destruction) | 10 to 55 Hz, 0.75 mm single amplitude each in X, Y, and Z directions for 2 hours |
Vibration resistance (Malfunction) | 10 to 55 Hz, 0.5 mm single amplitude each in X, Y, and Z directions for 10 min |
Shock resistance (Destruction) | 1000 m/s**2, 3 times each 6 directions |
Shock resistance (Malfunction) | 100 m/s**2, 3 times each 6 directions |
Mechanical life expectancy (relayoutput) | 10000000 operations min. (under no load at 1800 operations/h) |
Electrical life expectancy (relay output) | 100000 operations min. (5 A at 250 VAC, resistive load at 360 operations/h) |
Degree of protection | IP30(Terminal Block: IP20) |
Case color | Munsell 5Y7/1 (Light gray) |
Weight (Main) | Approx. 100 g |
As of August 8, 2016
As of August 8, 2016
Caution: All_units_are_in_millimeters_unless_otherwise_indicated.
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
about this Product