Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
H3DK-M1 AC/DC24-240
Multi-range, Multi-mode Timer
Image
Analog Timer, DC24 to 240V, AC24 to 240V
| Rated supply voltage |
24 to 240VAC 50/60 Hz 24 to 240VDC ripple: 20% max. |
|---|---|
| Input signals |
Start |
| Input method |
Voltage input |
| Control output （Type） |
Relay output (SPDT) |
- Ratings/Performance
As of August 8, 2016
| Rated supply voltage | 24 to 240VAC 50/60 Hz 24 to 240VDC ripple: 20% max. |
|---|---|
| Operating voltage range | 85% to 110% of rated supply voltage |
| Input signals | Start |
| Input method | Voltage input |
| Voltage input | High (logic) level: 20.4 to 264 VAC/DC Low (logic) level: 0 to 2.4 VAC/DC |
| Minimum input signal width | 50 ms min. (Start input) |
| Power consumption ( Relay ON ) | 4.5VA(at 240 VAC) 1.1W(at 24 VDC) |
| Power consumption ( Relay OFF ) | (at 240 VAC) (at 24 VDC) |
| Reset voltage | 10% max. of rated supply voltage |
| Number of time ranges | 8 |
| Time ranges | 0.1s～1.2s / 1s～12s / 10s～120s / 1min～12min / 10min～120min / 1h～12h / 10h～120h / 100h～1200h |
| Operating mode | ON delay, Flicker OFF start, Flicker ON start, Signal ON/OFF delay, Signal OFF delay, Interval, Signal ON/OFF delay, One shot output |
| Control output （Type） | Relay output (SPDT) |
| Control output （Contact output） | Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 30VDC 5A Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 125VDC 0.15A Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 125VDC 0.1A Minimum applicable load: 10 mA at 5 VDC (failure level: P) |
| Ambient temperature | Operating: -20 to 55℃ Storage: -40 to 70℃ |
| Ambient humidity | 使用時: 25～85% |
| Accuracy of operating time | +/- 1% max.(FS) （+/- 1% +/- 10 ms max. in a range of 1.2 s） |
| Setting error | -10 to 10% +/- 0.05 s max. (FS) |
| Influence of voltage | +/- 0.5% FS max. (+/- 0.5% +/- 10 ms max. in a range of 1.2 s) |
| Influence of temperature | +/- 2% FS max. (+/- 2% +/- 10 ms max. in a range of 1.2 s) |
| Insulation resistance | 100 MΩ (at 500 VDC) |
| Dielectric strength | between current carrying metal parts and non-current carrying metal parts: 2000 VAC, 50/60 Hz for 1 min between control output terminals and operating circuit: 2000 VAC, 50/60 Hz for 1 min between non-continuous contacts: 1000 VAC, 50/60 Hz for 1 min |
| Impulse withstand voltage | between power terminals: 5 kV between exposed non-current-carrying metal parts: 5 kV |
| Noise immunity | +/- 1.5 kV (between power terminals), square-wave noise by noise simulator (pulse width: 100 ns/1 us, 1-ns rise) |
| Static immunity | Mulfunction: 4 kV Destruction: 8 kV |
| Vibration resistance (Destruction) | 10 to 55 Hz, 0.75 mm single amplitude each in X, Y, and Z directions for 2 hours |
| Vibration resistance (Malfunction） | 10 to 55 Hz, 0.5 mm single amplitude each in X, Y, and Z directions for 10 min |
| Shock resistance (Destruction） | 1000 m/s**2, 3 times each 6 directions |
| Shock resistance (Malfunction） | 100 m/s**2, 3 times each 6 directions |
| Mechanical life expectancy (relayoutput) | 10000000 operations min. (under no load at 1800 operations/h) |
| Electrical life expectancy (relay output) | 100000 operations min. (5 A at 250 VAC, resistive load at 360 operations/h) |
| Degree of protection | IP30(Terminal Block: IP20) |
| Weight (Main) | Approx. 120 g |
As of August 8, 2016
- Dimensions
As of August 8, 2016
Caution: All_units_are_in_millimeters_unless_otherwise_indicated.
As of August 8, 2016
- Block diagram
As of August 8, 2016
As of August 8, 2016
- Terminal arrangement
As of August 8, 2016
As of August 8, 2016
- Time ranges
As of August 8, 2016
As of August 8, 2016
- Operating chart
As of August 8, 2016
As of August 8, 2016
Series
about this Product
Top of page