Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
E3S-DCP21-IL3
Color Mark Photoelectric Sensor
Image
Diffuse-reflective (mark detection), Sensing distance: 7 to 13 mm, IO-Link, Transmission speed: COM3 (230.4 kbps), High when mark is detected, Push-pull, M12 connector models, Timer function
| Sensing method |
Diffuse-reflective (mark detection) |
|---|---|
| Sensing distance |
7mm to 13mm (White paper 10 x 10 mm) |
| Light source |
Red LED (Emission wave length: 635 nm) Green LED (Emission wave length: 525 nm) Blue LED (Emission wave length: 465 nm) |
| Control output (Output type) |
Push-pull |
| Connection method |
M12 connector models |
- Ratings/Performance
As of September 9, 2016
| Sensing method | Diffuse-reflective (mark detection) |
|---|---|
| Sensing distance | 7mm to 13mm (White paper 10 x 10 mm) |
| Spot size | 1 x 4 mm |
| Light source | Red LED (Emission wave length: 635 nm) Green LED (Emission wave length: 525 nm) Blue LED (Emission wave length: 465 nm) |
| Power supply voltage | 10 to 30 VDC ±10% (ripple (p-p) 10% included) |
| Power consumption | (DC) 960 mW max. (at power supply voltage of 24 V, current consumption: 40 mA max. ) |
| Control output (Output type) | Push-pull |
| Control output (Load current) | 100 mA (30 VDC max.) |
| Communications | IO-Link Ver1.1 Transmission speed: COM3 (230.4 kbps) Data length: PD size: 8 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) Minimum cycle time: 1.5 ms |
| Operation mode | High when mark is detected |
| Protective circuit | Output short-cut protection Output short-circuit protection Power supply reverse polarity protection |
| Response time | 50 µs Max. 2-point teaching mode 150 µs Max. 1-point teaching mode |
| Sensitivity setting | Teaching method |
| Timer function | Select from Timer disabled, OFF-delay, ON-delay, One-shot, or ON-delay + OFF-delay timer 0.1ms to 5000ms |
| Ambient illuminance | Incandescent lamp: 3000 lux max. |
| Ambient temperature | Operating: -10 to 55℃ Storage: -25 to 70℃ (with no icing or condensation) |
| Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation) |
| Insulation resistance | 20 MΩ min. at 500 VDC |
| Dielectric strength | 1000 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP67 |
| Connection method | M12 connector models |
| Indicator | Operation indicator (orange), RUN indicator (green), 7-segment indicator (white), Key lock indicator (white), Timer indicator (white), 1-point teaching mode indicator (white) |
| Weight (packed state) | Approx. 370 g |
| Material (case) | Zinc diecast |
| Material (lens) | Methacrylate resin |
| Accessories | Instruction manual |
As of September 9, 2016
- Output circuit
As of September 9, 2016
As of September 9, 2016
about this Product
Top of page