Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
E2EQ-X7B4-IL2 2M
IO-Link Proximity Sensor (Spatter-resistant Models)
Image
Inductive type, Shielded, M18 x 1 mm, Sensing distance 7 mm, IO-Link, Transmission speed: COM2 (38.4 kbps), Operation mode NO/NC selectable, PNP DC 3-wire models, Self-diagnostic output, Pre-wired models (2 m)
| Sensing head size |
M18 |
|---|---|
| Type |
Shielded |
| Sensing method |
Inductive type |
| Sensing distance |
7 mm ±10% |
| Setting distance |
0 to 5.6 mm |
| Operation mode |
NO/NC selectable |
- Ratings/Performance
As of August 8, 2016
| Type | Shielded |
|---|---|
| Sensing method | Inductive type |
| Sensing distance | 7 mm ±10% |
| Setting distance | 0 to 5.6 mm |
| Differential distance | 10% max. of sensing distance |
| Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
| Standard sensing object | Iron 18 x 18 x 1 mm |
| Power supply voltage | 10 to 30 VDC ripple(p-p) 10% included |
| Current consumption | 20 mA max. |
| Control output (Output type) | PNP DC 3-wire models |
| Control output (Switching capacity) | 100 mA |
| Control output (Residual voltage) | 20 V max.(Load current 100 mA with cable length of 2 m) |
| Communications | IO-Link Ver1.1 Transmission speed: COM2 (38.4 kbps) Data length: PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) Minimum cycle time: 2.3 ms |
| Indicator | Operation indicator (orange, lit) and stability indicator (green, lit) (Standard I/O mode (SIO mode)) Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) (IO-Link mode) |
| Operation mode | NO/NC selectable |
| Self-diagnostic output | Equipped |
| Protective circuit | Surge suppressor Output short-cut protection Output reverse polarity protection Power supply reverse polarity protection |
| Ambient temperature | Operating: -25 to 70 ℃ Storage: -25 to 70 ℃ |
| Ambient humidity | Operating: 35 to 95% RH Storage: 35 to 95% RH |
| Temperature influence | ±10% max. of sensing distance in temperature range of -25 to +70 ℃ (As the basis for sensing distance of 23 ℃) |
| Voltage influence | ±1% max. of sensing distance in rated voltage range ±15%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | Between charged parts and the case: 50 MΩ min. at 500 VDC |
| Dielectric strength | Between charged parts and the case: 1000 VAC 50/60 Hz for 1 min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 1000 m/s**2 for 10 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP67 Company standard: Oil-proof |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Material (case) | Fluoride resin coating (base:brass) |
| Material (sensing surface) | Fluoride resin |
| Material (clamping nuts) | Fluoride resin coating (base: brass) |
| Material (toothed washer) | Iron zinc plating |
| Accessories | Instruction manual |
As of August 8, 2016
- Dimensions
As of August 8, 2016
As of August 8, 2016
- Sensing range
As of August 8, 2016
As of August 8, 2016
- Sensing distance vs. size and material of sensing object
As of August 8, 2016
As of August 8, 2016
Series
about this Product
Top of page