Rugged Incremental 50-mm-dia. Rotary Encoder
Encoding method |
Incremental |
---|---|
Resolution (Single turn type) |
2500 P/R |
Output phases |
A, B and Z |
Control output (Output type) |
NPN voltage output |
Connection method |
Pre-wired models(Cable_length: 2 m) |
As of September 9, 2016
Encoding method | Incremental |
---|---|
Power supply voltage | DC5 to 12 V (ripple (p-p): 5% max.) |
Current consumption | 100 mA DC Max. |
Inrush current | approx. 9A(Time : approx.0.1ms) |
Resolution (Single turn type) | 2500 P/R |
Output phases | A, B and Z |
Control output (Output type) | NPN voltage output |
Control output (Output resistance) | 2kΩ |
Control output (Load current) | 35mA max. |
Control output (Residual voltage) | 0.7 VDC max. |
Starting positional point | Equipped |
Max. response frequency | 125 kHz |
Phase difference on output | 90 DEG -45 to +45 DEG |
Rise and_fall times of output | Rise time of output: 1 μs max. Fall time of output: 1 μs max. (Cable length: 2m, load current: 35mA) |
Starting torque | Room temperature: 10 mN.m max. Low temperature: 30 mN.m max. |
Moment of inertia | 2.0 x 10**-6 kg.m**2 max. |
Shaft loading | Radial: 80 N Thrust: 50 N |
Max. permissible rotation | 5000 r/min |
Mechanical life expectancy | 100 million rotations min. |
Protective circuit | Output short cut protection Power supply reverce polarity protection |
Ambient temperature | Operating: -10 to 70 ℃ Storage: -25 to 85 ℃ |
Ambient humidity | Operating: 35 to 85%RH Storage: 35 to 85%RH |
Insulation resistance | 20 MOhm min. at 500 VDC between charged parts and the case |
Dielectric strength | 500 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions |
Shock resistance | 1000 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP65 |
Connection method | Pre-wired models(Cable_length: 2 m) |
Material (case) | Aluminum |
Material (body) | Aluminum |
Material (shaft) | SUS303 |
Material (flat spring) | - |
Material (mounting bracket) | - |
Accessories | Instruction manual |
As of September 9, 2016
As of September 9, 2016
Caution: All units are in millimeters unless otherwise indicated.
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
about this Product