EE-SX772 2M

Photomicrosensor with Slim Cable (Non-modulated)

Image

Non-modulated Through-beam type (with slot), T-shaped, Pre-wired (2m), Sensing distance: 5 mm, Dark-ON, NPN open collector

As of September 9, 2016


Appearance	T-shaped
Luminous method	Non-modulated
Sensing method	Through-beam type (with slot)
Sensing distance	0 to 5 mm (slot width)
Operation mode	Dark-ON
Standard sensing object	2 x 0.8 mm min.: Opaque
Differential distance elements	0.025 mm max.
Light source （Peak wavelength）	GaAs infrared LED
Indicator	Light indicator (red)
Power supply voltage	5 to 24V (-10% to 10%) (ripple (p-p)10% max.)
Current consumption	Average: 35 mAmax.
Control output （Output type）	NPNopen collector
Control output （Load power supply voltage）	5 to 24 V
Control output （Load current）	100 mAmax.
Control output （Residual voltage）	0.8 Vmax. (at 100 mA load current) 0.4 Vmax. (at 40 mA load current)
Response frequency elements	1 kHzmin. (average Ave3 kHz) （See "Measurement condition of Response frequency elements"）
Illumination on the surface receiver	1000 lx max. (fluorescent light)
Ambient temperature	Operating: -25 to +55℃ Storage: -30 to +80℃ （with no icing or condensation）
Ambient humidity	Operating: 5 to 85% Storage: 5 to 95% （with no icing or condensation）
Vibration resistance	20 to 2,000 Hz(peak acceleration 100 m/s**2), 1.5 mm double amplitude for 2 h (4 min periods) each in X, Y, and Z directions
Shock resistance	500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection （IEC60529）	IP60
Connection method	Pre-wired
Cable length	2 m
Material	Case: Polybutylene phthalate (PBT)