EE-SPX406-W2A 2M

Slot-type Photomicrosensor with Cable

Image

Modulated Through-beam type, Pre-wired (2m), Sensing distance: 3.6 mm, Light-ON, NPN voltage output

As of August 8, 2016


Luminous method	Modulated
Sensing method	Through-beam type
Sensing distance	0 to 3.6 mm (slot width)
Operation mode	Light-ON
Standard sensing object	1 x 0.5 mm min.: Opaque
Differential distance elements	0.05 mm max.
Light source （Peak wavelength）	GaAs infrared LED (pulse lighting)
Indicator	Light indicator (red)
Power supply voltage	5 to 24V (-10% to 10%) (ripple (p-p)5% max.)
Current consumption	Average: 15 mAmax. Peak: 50 mAmax.
Control output （Output type）	NPNvoltage output
Control output （Load power supply voltage）	5 to 24 V
Control output （Load current）	80 mAmax.
Control output （Residual voltage）	1.0 Vmax. (at 80 mA load current) 0.4 Vmax. (at 10 mA load current)
Response frequency elements	500 Hzmin. （See "Measurement condition of Response frequency elements"）
Illumination on the surface receiver	3000 lx max. (incandescent light, sunlight)
Ambient temperature	Operating: -10 to +55℃ Storage: -25 to +65℃ （with no icing or condensation）
Ambient humidity	Operating: 5 to 85% Storage: 5 to 95% （with no icing or condensation）
Vibration resistance	10 to 55 Hz, 1.5 mm double amplitude for 2 h
Shock resistance	500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection （IEC60529）	IP50
Connection method	Pre-wired
Cable length	2 m
Material	Case: Polycarbonate(PC) Holder: Polycarbonate(PC)