EE-SPW421-A

Photomicrosensor with Amplifier and Cable

Image

Modulated Through-beam type, Pre-wired (2m), Sensing distance: 300 mm, Light-ON, NPN open collector

As of August 8, 2016


Luminous method	Modulated
Sensing method	Through-beam type
Sensing distance	0 to 300 mm
Operation mode	Light-ON
Standard sensing object	2 mm dia. min.: Opaque (Detection of objects up to 0.5 mm wide is possible by using slit installation.)
Directional angle	10° to 40°
Light source （Peak wavelength）	GaAs infrared LED (pulse lighting)
Indicator	Light indicator (red LEDs on Sensor and Amplifier)
Power supply voltage	12 to 24V (-10% to 10%) (ripple (p-p)5% max.)
Current consumption	Average: 30 mAmax.
Control output （Output type）	NPNopen collector
Control output （Load power supply voltage）	12 to 24 V
Control output （Load current）	100 mAmax.
Control output （Residual voltage）	1 Vmax. (at 100 mA load current)
Response time	1 ms max. for both detection and reset
Illumination on the surface receiver	3000 lx max. (incandescent light) 10000 lx max. (sunlight)
Ambient temperature	Operating: -20 to +55℃ Storage: -20 to +55℃ （with no icing or condensation）
Ambient humidity	Operating: 5 to 85% Storage: 5 to 85% （with no icing or condensation）
Vibration resistance	10 to 55 Hz, 1.5 mm double amplitude for 2 h
Shock resistance	500 m/s**2
Degree of protection （IEC60529）	IP64
Connection method	Pre-wired
Cable length	2 m （Cable_length_from_emitter_to_amplifier: 1 m）
Material	Case: ABS resin Lens: Acrylate resin
Accessories	Slits: 0.5 x 3 mm, 1 x 3 mm, 3 x 0.5 mm, 3 x 1 mm (one each) / Sems screws with spring washers and flat washers: Six M2.6 x 12 / Instruction Manual