Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
E2K-F10MC2 2M
Flat Proximity Sensor
Image
Capacitive type, Unshielded, DC 3-wire models, Sensing distance 10 mm, Operation mode NC, NPN open collector output, Pre-wired models(2 m)
| Type |
Unshielded |
|---|---|
| Sensing method |
Capacitive type |
| Sensing distance |
10 mm-10% to +10% |
| Setting distance |
0 to 7.5 mm |
| Operation mode |
NC |
- Ratings/Performance
As of August 8, 2016
| Type | Unshielded |
|---|---|
| Sensing method | Capacitive type |
| Sensing distance | 10 mm-10% to +10% |
| Setting distance | 0 to 7.5 mm |
| Differential distance | 15% Max. of sensing distance |
| Sensing object | Conductor and dielectrics |
| Standard sensing object | With grounded metal 50 x 50 x 1 mm |
| Power supply voltage | 12 to 24 VDC ripple(p-p) 10% Max. |
| Operating voltage range | 10 to 30 VDC |
| Current consumption | 10 mA max.(at 24 VDC) |
| Control output (Output type) | NPN open collector output |
| Control output (Switching capacity) | 0 to 100 mA(at 30 VDC) |
| Indicator | Detection indicator (red) |
| Operation mode | NC |
| Sensitivity setting | - |
| Self-diagnostic output | - |
| Protective circuit | Surge suppressor Power supply reverse polarity protection |
| Standard or Different frequency | Standard |
| Ambient temperature | Operating: -10 to 55 ℃ Storage: -10 to 55 ℃ |
| Ambient humidity | Operating: 35 to 95%RH Storage: 3595%RH |
| Temperature influence | +/- 15% Max. of sensing distance in temperature range of -10 to +55 CEL (As the basis for sensing distance of 23 CEL) |
| Voltage influence | +/- 2.5% Max. of sensing distance in rated voltage range +/- 10%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | 50 MOhm Min. at 500 VDC between charged parts and the case |
| Dielectric strength | 500 VAC 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP66 |
| Connection method | Pre-wired models(Cable length: 2 m) |
| Weight (Packed state) | approx. 35 g |
| Material (case) | Heat-resistant ABS resin |
| Material (sensing surface) | Heat-resistant ABS resin |
| Accessories | Instruction manual |
As of August 8, 2016
- Dimensions
As of August 8, 2016
As of August 8, 2016
- Output circuit
As of August 8, 2016
As of August 8, 2016
- Sensing range
As of August 8, 2016
As of August 8, 2016
- Sensing distance vs. size and material of sensing object
As of August 8, 2016
As of August 8, 2016
about this Product
Top of page