E3S-R1E42 2M

Transparent Object Detection Sensor

Image

Retro-reflective without M.S.R. function, Sensing distance 1m, Light-ON/Dark-ON selectable, NPN voltage-current output, Pre-wired models(2m)

Sensing method	Retro-reflective without M.S.R. function
Sensing distance	0m to 1m (When using the E39-R1)
Light source	Infrared LED
Control output (Output type)	NPN voltage-current output
Connection method	Pre-wired models （Cable length: 2 m）

Item list of E3S-R

Ratings/Performance
Dimensions
Output circuit
Parallel operating range

Ratings/Performance

As of September 9, 2016


Sensing method	Retro-reflective without M.S.R. function
Sensing distance	0m to 1m (When using the E39-R1)
Standard sensing object	Opaque, Glass tube (10-mm dia. thickness: 1-mm length: 30-mm) 75 mm dia. Min.
Directional angle	Sensor: 3 to 10 DEG Reflector: 30 DEG Min.
Light source	Infrared LED
Power supply voltage	12 to 24 VDC -10% to 10% (ripple (p-p) 10% Max.)
Current consumption	40 mA DC Max.
Control output (Output type)	NPN voltage-current output
Control output (Load current)	0 to 80 mA
Control output (Residual voltage)	(DC) 2 V Max. (Load current 80mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	24 VDC Max.
Protective circuit	Output short-cut protection Power supply reverse polarity protection Mutual interference prevention
Response time	1 ms Max.
Sensitivity setting	Single-turn adjustment
Ambient illuminance	Incandescent lamp: 3000 lux Max., Sunlight: 10000 lux Max.
Ambient temperature	Operating: -25 to 55℃ Storage: -40 to 70℃ (with no icing or condensation)
Ambient humidity	Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation)
Insulation resistance	20 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67
Connection method	Pre-wired models （Cable length: 2 m）
Indicator	Light indicator (red), Stability indicator (green)
Material (case)	Zinc diecast
Material (lens)	Polycarbonate
Material (mounting bracket)	Iron
Accessories	Instruction manual, Mounting bracket (with screws), Sensitivity adjustment driver, Sensitivity adjuster, Reflector