Photoelectric Sensor with Separate Digital Amplifier (Laser-type)
Control output (Output type) |
PNP open collector output |
---|---|
Connection method |
Connector models (Special) |
As of September 9, 2016
Power supply voltage | 12 to 24 VDC -10% to 10% (ripple (p-p) 10% Max.) |
---|---|
Current consumption | 45 mA DC Max. |
Power consumption | (DC) 1080 mW Max. (at 24 VDC) |
Control output (Output type) | PNP open collector output |
Control output (Load current) | 0 to 50 mA |
Control output (Residual voltage) | (DC) 1 V Max. (Load current 50mA Max.) |
Operation mode | Light-ON/Dark-ON selectable |
Load power supply voltage | 26.4 VDC Max. |
Protective circuit | Surge suppressor Output short-cut protection Power supply reverse polarity protection Mutual interference prevention |
Sensitivity setting | Teaching method |
Self-diagnostic output | Equipped |
Timer function | ON-delay1ms to 5s OFF-delay1ms to 5s One-shot delay1ms to 5s |
Function | ATC function |
Ambient temperature | Operating: -25 to 55℃ Storage: -30 to 70℃ (with no icing or condensation) |
Ambient humidity | Operating: 35 to 85% Storage: 35 to 85% (with no icing or condensation) |
Insulation resistance | 20 MOhm Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP50 |
Connection method | Connector models (Special) |
Indicator | Operation indicator (orange), Digital display |
Material (case) | PBT |
Material (cover) | Polycarbonate |
Amplifier unit/senso head of combination | E3C-LD[][], E3C-LR[][] |
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
about this Product