Aluminum-detecting Proximity Sensor
Sensing head size |
M18 |
---|---|
Type |
Shielded |
Sensing method |
Inductive type |
Sensing distance |
4 mm-10% to +10% |
Setting distance |
0 to 2.8 mm |
Operation mode |
NO |
As of August 8, 2016
Type | Shielded |
---|---|
Sensing method | Inductive type |
Sensing distance | 4 mm-10% to +10% |
Setting distance | 0 to 2.8 mm |
Differential distance | 20% Max. of sensing distance |
Sensing object | Non-ferrous metal (Ferrous metal is not detected.) |
Standard sensing object | Aluminum 18 x 18 x 1 mm |
Power supply voltage | 12 to 24 VDC ripple(p-p) 10% Max. |
Operating voltage range | 10 to 30 VDC |
Current consumption | 20 mA max. |
Control output (Output type) | NPN open collector output |
Control output (Switching capacity) | 0 to 100 mA(at 30 VDC) |
Indicator | Detection indicator (red) |
Operation mode | NO |
Sensitivity setting | - |
Self-diagnostic output | - |
Protective circuit | Surge suppressor Output short-cut protection Power supply reverse polarity protection |
Standard or Different frequency | Standard |
Ambient temperature | Operating: -10 to 55 ℃ Storage: -10 to 55 ℃ |
Ambient humidity | Operating: 35 to 95%RH Storage: 3595%RH |
Temperature influence | +/- 20% Max. of sensing distance in temperature range of -10 to +55 CEL (As the basis for sensing distance of 23 CEL) |
Voltage influence | +/- 2.5% Max. of sensing distance in rated voltage range +/- 15%. (As the basis for sensing distance at standard power voltage) |
Insulation resistance | 50 MOhm Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1000 VAC 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 1000 m/s**2 for 10 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP67 Company standard: Oil-proof |
Connection method | Pre-wired models(Cable length: 2 m) |
Weight (Packed state) | approx. 140 g |
Material (case) | Brass nickel plating |
Material (sensing surface) | Heat-resistant ABS resin |
Material (clamping nuts) | Brass nickel plating |
Material (toothed washer) | Iron zinc plating |
Accessories | Not equipped |
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
As of August 8, 2016
about this Product