E3S-CT11-M1J 0.3M

Oil-resistive, Long-range Photoelectric Sensor with Metal Housing

Image

Through-beam, Sensing distance 30m, Light-ON/Dark-ON selectable, NPN/PNP output, Pre-wired M12 connector models(0.3m)

Sensing method	Through-beam
Sensing distance	0m to 30m
Light source	Infrared LED
Control output (Output type)	NPN/PNP open collector output
Connection method	Pre-wired M12 connector models （Cable length: 0.3 m）

Item list of E3S-C

Ratings/Performance
Dimensions
Output circuit
Parallel operating range
Setting distance

Ratings/Performance

As of September 9, 2016


Sensing method	Through-beam
Sensing distance	0m to 30m
Standard sensing object	Opaque 15 mm dia. Min.
Directional angle	Emitter: 3 to 15 DEG Receiver: 3 to 15 DEG
Light source	Infrared LED
Power supply voltage	10 to 30 VDC (ripple (p-p) 10% included)
Current consumption	Emitter: 25 mA DC Max. Receiver: 25 mA DC Max.
Control output (Output type)	NPN/PNP open collector output
Control output (Load current)	0 to 100 mA
Control output (Residual voltage)	(DC) 1.2 V Max. (NPN output, Load current 100mA Max.) (DC) 2 V Max. (PNP output, Load current 100mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	30 VDC Max.
Protective circuit	Surge suppressor Power supply reverse polarity protection
Response time	1 ms Max.
Sensitivity setting	Single-turn adjustment
Ambient illuminance	Incandescent lamp: 5000 lux Max., Sunlight: 10000 lux Max.
Ambient temperature	Operating: -25 to 55℃ Storage: -40 to 70℃ (with no icing or condensation)
Ambient humidity	Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation)
Insulation resistance	20 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions
Shock resistance	1000 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67Company standard: Oil-proof
Connection method	Pre-wired M12 connector models （Cable length: 0.3 m）
Indicator	Light indicator (red), Stability indicator (green), Power indicator (red)
Tightening torque	1.18 N・m Max. (with M4 screw)
Material (case)	Zinc diecast
Material (lens)	Methacrylate resin
Material (cover)	Polyethyl sulfon
Material (mounting bracket)	Stainless steel(SUS304)
Accessories	Mounting bracket (with screws), Adjustment driver