Distance-settable Photoelectric Sensor with Metal Case
Sensing method |
Distance-setting |
---|---|
Sensing distance |
5mm to 500mm (White paper 200 x 200 mm) |
Light source |
Infrared LED |
Control output (Output type) |
NPN/PNP open collector output |
Connection method |
Pre-wired models (Cable length: 2 m) |
As of September 9, 2016
Sensing method | Distance-setting |
---|---|
Sensing distance | 5mm to 500mm (White paper 200 x 200 mm) |
Setting range | 50 to 500mm (White paper 200 x 200 mm) |
Differential distance | 10% Max. of setting distance |
Reflectivity characteristic (black-white error) | 10% Max. of setting distance |
Light source | Infrared LED |
Power supply voltage | 10 to 30 VDC (ripple (p-p) 10% included) |
Current consumption | 50 mA DC Max. |
Control output (Output type) | NPN/PNP open collector output |
Control output (Load current) | 0 to 100 mA |
Control output (Residual voltage) | (DC) 1.2 V Max. (NPN output, Load current 100mA Max.) (DC) 2 V Max. (PNP output, Load current 100mA Max.) |
Operation mode | Light-ON/Dark-ON selectable |
Load power supply voltage | 30 VDC Max. |
Protective circuit | Surge suppressor Output short-cut protection Power supply reverse polarity protection Mutual interference prevention |
Response time | 2 ms Max. |
Sensitivity setting | 6-turn endless adjustment (with indicator) |
Ambient illuminance | Incandescent lamp: 5000 lux Max., Sunlight: 10000 lux Max. |
Ambient temperature | Operating: -25 to 55℃ Storage: -25 to 55℃ (with no icing or condensation) |
Ambient humidity | Operating: 35 to 85% Storage: 35 to 85% (with no icing or condensation) |
Insulation resistance | 20 MOhm Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP67Company standard: Oil-proof |
Connection method | Pre-wired models (Cable length: 2 m) |
Indicator | Light indicator (orange), Stability indicator (green) |
Tightening torque | 1.2 N・m Max. (with M4 screw) |
Material (case) | Zinc diecast |
Material (lens) | Methacrylate resin |
Material (cover) | Polyethyl sulfon |
Material (mounting bracket) | Stainless steel(SUS304) |
Accessories | Instruction manual, Mounting bracket, Adjustment driver, Hexagon bolt M4 x 12 (with Spring washers, Flat washers) |
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
As of September 9, 2016
about this Product