Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

E3NC-SA9

Smart Laser Sensors

Page top

E3NC-SA9

Light-ON/Dark-ON selectable, PNP output, Connector models (Special)

Control output (Output type) PNP open collector output
Connection method Connector models (Special)

Item list of E3NC

  • Ratings/Performance
Power supply voltage10 to 30 VDC (ripple (p-p) 10% Max.)
Current consumption80 mA DC Max. (Normal Mode, at 24 V)
70 mA DC Max. (Eco ON, at 24 V)
75 mA DC Max. (Eco LO, at 24 V)
Power consumption(DC) 1920 mW Max. (Normal Mode, at 24 V)
(DC) 1680 mW Max. (Eco ON, at 24 V)
(DC) 1800 mW Max. (Eco LO, at 24 V)
Control output (Output type)PNP open collector output
Control output (Load current)100 mA
Control output (Residual voltage)(DC) 1 V Max. (Load current: Less than 10mA)
(DC) 2 V Max. (Load current: 10 to 100 mA)
Operation modeLight-ON/Dark-ON selectable
Protective circuitOutput short-circuit protection
Mutual interference prevention
Response time1.5 ms Max. Super-high-speed mode
5 ms Max. High-speed mode
10 ms Max. Standard mode
50 ms Max. Giga-power mode
Sensitivity settingSmart Tuning (2-point tuning, Full auto tuning, 1-point tuning, Tuning without workpiece, 2-point area tuning, 1-point area tuning, or Area tuning without workpiece), or Manual adjustment
Timer functionSelect from Timer disabled, OFF-delay, ON-delay, One-shot, or ON-delay + OFF-delay timer1ms to 9999ms
FunctionZero reset, Resetting settings, Eco mode, Bank switching, Output 1, External input, Keep function, Background suppression, Hysteresis width
Ambient temperatureOperating: -25 to 55℃
Storage: -30 to 70℃
(with no icing or condensation)
Ambient humidityOperating: 35 to 85%
Storage: 35 to 85%
(with no icing or condensation)
Insulation resistance20 MOhm Min. at 500 VDC
Dielectric strength1000 VAC at 50/60 Hz for 1 minute
Vibration resistance10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance500 m/s**2 for 3 times each in X, Y, and Z directions
Connection methodConnector models (Special)
IndicatorMain Digital Display (White), Sub-Display (Green), OUT indicator (Orange), L/D indicator (Orange), ST indicator (Blue), ZERO indicator (Green)
Material (case)Polycarbonate
Material (lens)Methacrylate resin
AccessoriesInstruction manual
  • Dimensions

  • Output circuit

Series

Smart Laser Sensors

E3NC

about this Product