E2EH-X12D1-T 2M

Proximity Sensor Ideal for High Temperatures and Cleaning Processes

Image

Inductive type, Shielded, M30*1.5mm, DC 2-wire models, Sensing distance 12 mm, Operation mode NO, DC 2-wire models with no polarity, Pre-wired models(2 m)

Sensing head size	M30
Type	Shielded
Sensing method	Inductive type
Sensing distance	12 mm-10% to +10%
Setting distance	0 to 9.6 mm
Operation mode	NO

Item list of E2EH

Ratings/Performance
Dimensions
Output circuit
Sensing range
Residual voltage
Sensing distance vs. size and material of sensing object

Ratings/Performance

As of September 9, 2016


Type	Shielded
Sensing method	Inductive type
Sensing distance	12 mm-10% to +10%
Setting distance	0 to 9.6 mm
Differential distance	15% Max. of sensing distance
Sensing object	Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object	Iron 36 x 36 x 1 mm
Power supply voltage	12 to 24 VDC ripple(p-p) 10% Max.
Operating voltage range	10 to 32 VDC
Leakage current	0.8 mA max.
Control output (Output type)	DC 2-wire models with no polarity
Control output (Switching capacity)	3 to 100 mA(Ambient temperature of 0 to 100 CEL.) 3 to 50 mA(Ambient temperature of 100 to 110 CEL.)
Indicator	Operation indicator (red), Operation setting indicator (yellow)
Operation mode	NO
Sensitivity setting	-
Self-diagnostic output	-
Protective circuit	Surge suppressor Output short-cut protection
Standard or Different frequency	Standard
Ambient temperature	Operating: 0 to 100 ℃ Storage: -25 to 70 ℃
Ambient humidity	Operating: 35 to 95%RH Storage: 3595%RH
Temperature influence	+/- 10% Max. of sensing distance in temperature range of 0 to +70 CEL +/- 15% Max. of sensing distance in temperature range of +70 to +100 CEL -15% to +20% of sensing distance in temperature range of +100 to +110 CEL (As the basis for sensing distance of 23 CEL
Voltage influence	+/- 1% Max. of sensing distance in rated voltage range +/- 15%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	50 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	1000 m/s**2 for 10 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67
Connection method	Pre-wired models(Cable length: 2 m)
Weight (Packed state)	approx. 220 g
Material (case)	Stainless steel (SUS316L)
Material (sensing surface)	PBT
Material (clamping nuts)	Stainless steel (SUS316L)
Accessories	Instruction manual