Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

E3NC-LA9

Smart Laser Sensors

Page top

E3NC-LA9

Light-ON/Dark-ON selectable, PNP output, Connector models (Special)

Control output (Output type) PNP open collector output
Connection method Connector models (Special)

Item list of E3NC

  • Ratings/Performance
Power supply voltage10 to 30 VDC (ripple (p-p) 10% Max.)
Current consumption65 mA DC Max. (Normal Mode, at 24 V)
55 mA DC Max. (Eco ON, at 24 V)
60 mA DC Max. (Eco LO, at 24 V)
Power consumption(DC) 1560 mW Max. (Normal Mode, at 24 V)
(DC) 1320 mW Max. (Eco ON, at 24 V)
(DC) 1440 mW Max. (Eco LO, at 24 V)
Control output (Output type)PNP open collector output
Control output (Load current)100 mA
Control output (Residual voltage)(DC) 1 V Max. (Load current: Less than 10mA)
(DC) 2 V Max. (Load current: 10 to 100 mA)
Operation modeLight-ON/Dark-ON selectable
Protective circuitOutput short-circuit protection
Mutual interference prevention
Response time80 us Max. Super-high-speed mode
250 us Max. High-speed mode
1 ms Max. Standard mode
16 ms Max. Giga-power mode
Sensitivity settingSmart Tuning (2-point tuning, Full auto tuning, Position tuning, Maximum sensitivity tuning, Power tuning, or Percentage tuning (-99% to +99%)), or Manual adjustment
Timer functionSelect from Timer disabled, OFF-delay, ON-delay, One-shot, or ON-delay + OFF-delay timer1ms to 9999ms
FunctionDynamic power control (DPC), Zero reset, Resetting settings, Eco mode, Bank switching, Power tuning, Output 1, External input, Hysteresis width
Ambient temperatureOperating: -25 to 55℃
Storage: -30 to 70℃
(with no icing or condensation)
Ambient humidityOperating: 35 to 85%
Storage: 35 to 85%
(with no icing or condensation)
Insulation resistance20 MOhm Min. at 500 VDC
Dielectric strength1000 VAC at 50/60 Hz for 1 minute
Vibration resistance10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance500 m/s**2 for 3 times each in X, Y, and Z directions
Connection methodConnector models (Special)
IndicatorMain Digital Display (White), Sub-Display (Green), OUT indicator (Orange), L/D indicator (Orange), ST indicator (Blue), DPC indicator (Green)
Material (case)Polycarbonate
Material (lens)Methacrylate resin
AccessoriesInstruction manual
  • Dimensions

  • Output circuit

Series

Smart Laser Sensors

E3NC

about this Product