Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Power Supply
ProductsPower Supply
| Model | Ratings | Environmental Category | Remarks | |
|---|---|---|---|---|
| S8VK-G | 100 to 240V AC 90 to 350V DC |
ENV1,2,3 | * | S8VK-R | 5 to 30V DC (S8VK-R10) 10 to 60V DC (S8VK-R20) |
ENV1,2,3 | * | S8VK-S | 100 to 240V AC | ENV1,2,3 | * | S8VK-T | 380 to 480V AC 450 to 600V DC |
ENV1,2,3 | * | S8VS Without indication monitor (standard model) | 100 to 240V AC | ENV1,2,3 | * |
* General Power distribution Zones |
|||||||||||||||||||||||||||||||||||||||||||||||||
Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers. |
|||||||||||||||||||||||||||||||||||||||||||||||||
Note 2: For type approvals, these models shall not be installed on the deck, in the bridge, or on machinery that has severe vibration conditions. |
|||||||||||||||||||||||||||||||||||||||||||||||||
Note 3. Observe the following application conditions when using S8VK-G and S8VK-R series model as an LR-approved product. |
|||||||||||||||||||||||||||||||||||||||||||||||||
Connect a Noise Filter (ZCAT2035-0930 manufactured by TDK) to the I/O cable. |
|||||||||||||||||||||||||||||||||||||||||||||||||
Connect a Noise Filter (FN2080-10-06 manufactured by Schaffner) to the input terminal. |
|||||||||||||||||||||||||||||||||||||||||||||||||
If you mount the Power Supply to a DIN Rail, secure it with an End Plate (PFP-M manufactured by OMRON) on both ends. |
|||||||||||||||||||||||||||||||||||||||||||||||||
Note 4. In the case of using side-mounting bracket (S82Y-VK10S, S82Y-VK20S) for S8VK-T series, LR Standard are not applicable. |
|||||||||||||||||||||||||||||||||||||||||||||||||
For type approval for the LR (Lloyd's Register of Shipping) was made according to the LR Type Approval System Test Specification No. 1. |
|||||||||||||||||||||||||||||||||||||||||||||||||
Refer to the following table for environmental categories. |
|||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Note: Models that are certified for an ENV2 environment can also be used in an ENV1 environment. |
|||||||||||||||||||||||||||||||||||||||||||||||||
Top of pagePower/Component Protective Components, and Power Sensors
| Model | Ratings | Environmental Category |
|---|---|---|
| K2WR-R | AC 5A, 100/110/200/220V AC 50/60Hz | ENV1,2 | K8DT-PH | 200 to 480V AC | ENV1,2 | K8DT-PM | 200 to 240V AC, 380 to 480V AC | ENV1,2 | K8DT-PZ | 200 to 240V AC, 380 to 480V AC | ENV1,2 |
Wiring-reduction and Work-saving Components
| Model | Ratings | Environmental Category | Remarks | |
|---|---|---|---|---|
| G71/G72C/G730 | --- | ENV1,2,3 | * | |
* General Power distribution Zones |
|||||||||||||||||||||||||||||||||||||||||||||||||
Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers. |
|||||||||||||||||||||||||||||||||||||||||||||||||
Note 2: For type approvals, these models shall not be installed on the deck, in the bridge, or on machinery that has severe vibration conditions. |
|||||||||||||||||||||||||||||||||||||||||||||||||
For type approval for the LR (Lloyd's Register of Shipping) was made according to the LR Type Approval System Test Specification No. 1. |
|||||||||||||||||||||||||||||||||||||||||||||||||
Refer to the following table for environmental categories. |
|||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Note: Models that are certified for an ENV2 environment can also be used in an ENV1 environment. |
|||||||||||||||||||||||||||||||||||||||||||||||||