Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
If I want to run an NJ-series Controller without a battery, can I disable detection of the Low Battery Error, like I can in the Programmable Controller system settings for the CS Series and CJ Series?
Answer
No, the NJ-series Controllers are designed to always detect the Low Battery error. When this error occurs, the _RetainFail (Retention Failure Flag) system-defined variable changes to TRUE, and the ERROR indicator on the front panel of the CPU Unit flashes.
Recommended Products
Other Machine Automation Controllers FAQ
-
On an NJ-series Controller, I used a variable with a TIME data type to register the timer set value for a TON instruction and other timer instructions. I want to change the set value from an NS-series Programmable Terminal, but it does not support variables with a TIME data type. How should I set the timer?
-
Is there a limit to the number of user-defined function blocks and user-defined functions that I can create in an NJ-series Controller?
-
There are two ways to register as a user for the Sysmac Studio: by mailing the user registration post card or by using online registration. Should I use both?
FAQ
Top of page