Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
What cables are used to connect the CX-Simulator to an OMRON Programmable Terminal to operate the Programmable Terminal?
Answer
The Programmable Terminal's pin allocation is the same as a Programmable Controller's pin allocation, so use the same cable that is used to connect the computer to a Programmable Controller.
The following tables show the cables that can be used.
Cables for Touch Panels with a 9-pin Connector
| IBM PC/AT or compatible | XW2Z-200S-V/500S-V |
| PC98 computer, 25-pin | XW2Z-200S/500S |
| PC98 computer, Half-pitch 14-pin | XW2Z-200S/500S + XW2Z-S001 |
Cables for Touch Panels with a 25-pin Connector
| IBM PC/AT or compatible | XW2Z-200P-V/500P-V |
| PC98 computer, 25-pin | XW2Z-200P/500P |
| PC98 computer, Half-pitch 14-pin | XW2Z-200P/500P + XW2Z-S001 |
Recommended Products
Other Programmable Terminals FAQ
-
How can I import I/O comments that were created with the CX-Programmer FA Integrated Tool Package into the NT-ZJCMX1-EV4 NT Support Tool?
-
What method is used to store the screens in the NT30, NT31, NT620, and NT631 Programmable Terminals?
-
When we install CX-Programmer FA Integrated Tool Package, what does Fins Gateway NSB Support Function means in the dialog?
FAQ
Top of page