Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

Lead Contents

FAQ01107 of Programmable Controllers FAQ

FAQ No. FAQ01107

Primary Contents

Question

What are the differences in Support Software, instructions, and the way Extended Data Memory is handled between the C200HX/HG/HE Programmable Controllers and C200HX/HG/HE-Z Programmable Controllers?

Answer



1.The C200HX/HG/HE can be supported with pre-Windows DOS-based and Windows-based Support Software. The C200HX/HG/HE-Z is supported only by Windows-based Support Software.

2.The C200HX/HG/HE supports expansion instructions. Some instructions do not have function codes. To make the C200HX/HG/HE-Z compatible with the C200HX/HG/HE, expansion instructions can be set, or 3-digit function codes can be used. Also, symbol instructions can also be used.

3.Extended Data Memory on the C200HX/HG/HE can only be used with certain instructions. On the C200HX/HG/HE-Z, Extended Data Memory can be used with almost every instruction.

Refer to the following for information on the instructions that have been added to the C200HX/HG/HE-Z.

Differences between the C200HX/HG/HE and C200HX/HG/HE-Z

C200HX/HG/HE
models
C200HX/HG/HE-Z models
Function codes can be
assigned to expansion
instructions.
N/AAll expansion instructions, except the following, are assigned function codes: IEMS, BXF2, XFR2, ADBL, and SBBL.
The expansion instructions MBS, DBS, MBSL, and DBSL are not assigned function codes.
With IEMS, BXF2, and XFR2, an Extended Data Memory address can be specified for an operand for substitution. Also, with ADBL, SBBL, MBS, DBS, MBSL, and DBSL, the symbol instructions +CL, -CL, *, /, *L, and /L can be used for substitution.
Addition of Symbol
Expressions for
Math Instructions
and Comparison
Instructions
N/ASymbol Math Instructions
BINARY ADD: +, +L, +C, +CL
BCD ADD: +B, +BL, +BC, +BCL
BINARY SUBTRACT: -, -L, -C, -CL
BCD SUBTRACT: -B, -BL, -BC, -BCL
BINARY MULTIPLY: *, *L, *U, *UL
BCD MULTIPLY: *B, *BL
BINARY DIVIDE: /, /L, /U, /UL
BCD DIVIDE: /B, /BL
Comparison Instructions
BIT TEST: TST, TSTN
EQUAL To: =, =L, =S, =SL
NOT EQUAL: <>,<>L, <>S, <>SL
LESS THAN: <, LESS THAN OR EQUALS: <=, <=L, <=S, <=SL
GREATER THAN: >, >L, >S, >SL
GREATER THAN OR EQUALS: >=, >=L, >=S, >=SL
Note: Comparison instructions that have been added cannot be connected directly to the bus bar.
Others: BXFR and CMT

Note:Microsoft Windows is a registered trademark of Microsoft Corporation.