Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

Lead Contents

FAQ00922 of Counters FAQ

FAQ No. FAQ00922

Primary Contents

Question

What is the inrush current for Counters?

Answer



Using the H7BR, which has a current of approximately 10 VA (for 240 VAC, 50 Hz), as an example, an inrush current of approximately 8 A continues for approximately 2 ms when the power is turned ON.

If the Countera's power supply is turned ON/OFF with a transistor, the inrush current may damage the transistor.

Refer to the following table of inrush currents (reference values).

The blank spaces in the table indicate inrush currents that have been omitted because they are close to the steady-state current.

The values shown in the table are approximate values and should be used for reference only.

Counters

Cam Positioners /Multi-Counters

Note: The inrush current time is measured in the wave range shown in the following figure.

Recommended Products

K3HB-X

A Process Indicator Ideal for Discriminating and Displaying Measurements for Voltage/Current Signals

E5CN-H

A New High-performance Controller: High Resolution, High Speed, and High Input Accuracy. Logic Operations and Preventive Maintenance Function.

H5CZ

Easy to Use and Easy to Read.

Other Counters FAQ