Item list of E63-WF
| Model | E63-WF5C | |
|---|---|---|
| Power supply voltage | 12 VDC -10% to 24 VDC +15%, ripple (p-p): 5% max. | |
| Current consumption | 50 mA max. | |
| Input | Input signal | Phases A, B, and Z (phase difference signals) |
| Phase difference | 90° ±45° max. | |
| ON | 6 mA max. at 0 to 2 V | |
| OFF | 1.5 mA max. at 8 to 24 V | |
| Input short current | 9 mA | |
| Max. applied voltage | 30 V max. | |
| Input impedance | Approx. 1 Ω | |
| Output | Output signal | UP/DOWN (direction detection), COUNTS output (count), OUT Z |
| Output configuration | Open-collector output | |
| Output capacity | Applied voltage: 30 VDC max. Sink current: 80 mA max. Residual voltage: 1 V max. (at sink current of 80 mA) Residual voltage: 0.4 V max. (at sink current of 20 mA) |
|
| Maximum response frequency | 120 kHz | |
| Output response time | 2 μs max. | |
| Indicators | Power indicator (red), Phase Z output indicator (green) | |
| Ambient temperature range | Operating: -10 to 55°C (with no icing), Storage: -25 to 80°C (with no icing) | |
| Ambient humidity range | Operating/Storage: 35% to 85% (with no condensation) | |
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | |
| Shock resistance | Destruction: 300 m/s2 3 times each in X, Y, and Z directions | |
| Connection method | Terminal block | |
| Material | Case: ABS | |
| Weight (packed state) | Approx. 100 g | |
| Accessories | Instruction manual (S3D8 Connector is not provided.) | |
Top of Page