Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

E3Z-[]-IL[]

IO-Link Photoelectric Sensor

E3Z-[]-IL[]

IO-Link Makes Sensor Level Information Visible and Solves the Three Major Issues at Manufacturing Sites! Standard Photoelectric Sensor.

about this Product Family

IO-Link Model / Sensors

Sensing
method
Appearance Connection
method
Sensing
distance
IO-Link
baud rate
Model
PNP
Through-
beam
(Emitter +
Receiver)
*3
3542_lu_1_1 Pre-wired (2 m) 15 m
(Infrared light)
COM2
(38.4 kbps)
E3Z-T81-IL2 2M
Emitter E3Z-T81-L-IL2 2M
Receiver E3Z-T81-D-IL2 2M
Pre-wired
M12 connector
E3Z-T81-M1TJ-IL2 0.3M
Emitter E3Z-T81-L-M1TJ-IL2 0.3M
Receiver E3Z-T81-D-M1TJ-IL2 0.3M
Standard
M8 connector
E3Z-T86-IL2
Emitter E3Z-T86-L-IL2
Receiver E3Z-T86-D-IL2
Pre-wired (2 m) COM3
(230.4 kbps)
E3Z-T81-IL3 2M
Emitter E3Z-T81-L-IL3 2M
Receiver E3Z-T81-D-IL3 2M
Pre-wired
M12 connector
E3Z-T81-M1TJ-IL3 0.3M
Emitter E3Z-T81-L-M1TJ-IL3 0.3M
Receiver E3Z-T81-D-M1TJ-IL3 0.3M
Standard
M8 connector
E3Z-T86-IL3
Emitter E3Z-T86-L-IL3
Receiver E3Z-T86-D-IL3
Retro-
reflective
with MSR
function
3542_lu_1_2 Pre-wired (2 m) 4 m (100 mm) *2
(When using
E39-R1S)
(Red light)
COM2
(38.4 kbps)
E3Z-R81-IL2 2M
Pre-wired
M12 connector
E3Z-R81-M1TJ-IL2 0.3M
Standard
M8 connector
E3Z-R86-IL2
Pre-wired (2 m) COM3
(230.4 kbps)
E3Z-R81-IL3 2M
Pre-wired
M12 connector
E3Z-R81-M1TJ-IL3 0.3M
Standard M8
connector
E3Z-R86-IL3
Diffuse-
reflective
3542_lu_1_3 Pre-wired (2 m) 1 m
(Infrared light)
COM2
(38.4 kbps)
E3Z-D82-IL2 2M
Pre-wired
M12 connector
E3Z-D82-M1TJ-IL2 0.3M
Standard
M8 connector
E3Z-D87-IL2
Pre-wired (2 m) COM3
(230.4 kbps)
E3Z-D82-IL3 2M
Pre-wired
M12 connector
E3Z-D82-M1TJ-IL3 0.3M
Standard
M8 connector
E3Z-D87-IL3
Pre-wired (2 m) 90 mm
(narrow beam)
(Red light)
COM2
(38.4 kbps)
E3Z-L81-IL2 2M
Pre-wired
M12 connector
E3Z-L81-M1TJ-IL2 0.3M
Standard
M8 connector
E3Z-L86-IL2
Pre-wired (2 m) COM3
(230.4 kbps)
E3Z-L81-IL3 2M
Pre-wired
M12 connector
E3Z-L81-M1TJ-IL3 0.3M
Standard
M8 connector
E3Z-L86-IL3

Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. The sensing distance specified is possible when the E39-R1S is used. Values in parentheses indicate the minimum
       required distance between the Sensor and Reflector.
*3. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.

Accessories (Sold Separately)

Slit

(A Slit is not provided with Through-beam Sensors) Order a Slit separately if required.

Slit width Sensing distance Minimum detectable object
(Reference value)
Model Contents
E3Z-T[][]
0.5-mm dia. 50 mm 0.2-mm dia. E39-S65A One set
(contains Slits for both the
Emitter and Receiver)
1-mm dia. 200 mm 0.4-mm dia. E39-S65B
2-mm dia. 800 mm 0.7-mm dia. E39-S65C
0.5 × 10 mm 1 m 0.2-mm dia. E39-S65D
1 × 10 mm 2.2 m 0.5-mm dia. E39-S65E
2 × 10 mm 5 m 0.8-mm dia. E39-S65F

Reflectors

(Reflector required for Retroreflective Sensors) A Reflector is not provided with the Sensor. Be sure to order a Reflector separately.

Name Sensing distance * Model Quantity Remarks
E3Z-R
Rated value Reference value
Reflector 3 m (100 mm) --- E39-R1 1 • Reflectors are not provided with
Retro-reflective models.
• The MSR function of the
E3Z-R[] is enabled.
4 m (100 mm) --- E39-R1S 1
--- 5 m (100 mm) E39-R2 1
--- 2.5 m (100 mm) E39-R9 1
--- 3.5 m(100 mm) E39-R10 1
Fog Preventive Coating --- 3 m (100 mm) E39-R1K 1
Small Reflector --- 1.5 m (50 mm) E39-R3 1
Tape Reflector --- 700 mm (150 mm) E39-RS1 1
--- 1.1 m (150 mm) E39-RS2 1
--- 1.4 m (150 mm) E39-RS3 1

Note:1. If you use the Reflector at any distance other than the rated distance, make sure that the stability indicator lights
              properly when you install the Sensor.
          2. Refer to Reflectors on E39-L/E39-S/E39-R on your OMRON website for details.
* Values in parenthese indicate the minimum required distance between the Sensor and Reflector.

Mounting Brackets

A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required.

Appearance Model (material) Quantity Remarks
3542_lu_4_1 E39-L153
(SUS304) *1
1 Mounting Brackets
3542_lu_4_2 E39-L104
(SUS304) *1
1
3542_lu_4_3 E39-L43
(SUS304) *2
1 Horizontal Mounting Brackets
3542_lu_4_4 E39-L142
(SUS304) *2
1 Horizontal Protective Cover Bracket
3542_lu_4_5 E39-L44
(SUS304)
1 Rear Mounting Bracket
3542_lu_4_6 E39-L98
(SUS304) *2
1 Metal Protective Cover Bracket
3542_lu_4_7 E39-L150
(SUS304)
1 (Sensor adjuster)
Easily mounted to the aluminum frame rails of conveyors
and easily adjusted.
For left to right adjustment
3542_lu_4_8 E39-L151
(SUS304)
1
3542_lu_4_9 E39-L144
(SUS304) *2
1 Compact Protective
Cover Bracket (For E3Z only)

Note:1. When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
          2. Refer to Mounting Brackets on E39-L/E39-S/E39-R on your OMRON website for details.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired
      Connector models.
*2. Cannot be used for Standard Connector models.

Sensor I/O Connectors

(Models for Connectors and Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Size Type Appearance Cable length Model
M12 Socket on one cable
end
Smartclick connector
Straight *2
3542_lu_5_1 2 m XS5F-D421-D80-F
5 m XS5F-D421-G80-F
Smartclick connector
L-shape *2 *3
3542_lu_5_2 2 m XS5F-D422-D80-F
5 m XS5F-D422-G80-F
Socket and plug on
cable ends *1
Smartclick connector
Straight/
Straight *2
3542_lu_5_3 2 m XS5W-D421-D81-F
5 m XS5W-D421-G81-F
Smartclick connector
L-shape/L-shape *2 *3
3542_lu_5_4 2 m XS5W-D422-D81-F
5 m XS5W-D422-G81-F
M8 Socket on one cable
end
Straight *3 3542_lu_5_5 2 m XS3F-M421-402-A
5 m XS3F-M421-405-A
L-shape *3 *4 3542_lu_5_6 2 m XS3F-M422-402-A
5 m XS3F-M422-405-A
M8 socket/
M12 plug
Socket and plug on
cable ends
M8-M12 (Smartclick)
conversion cable *2
3542_lu_5_7 0.2 m XS3W-M42C-4C2-A

Note:1. When using Through-beam models, order one connector for the Receiver and one for the Emitter.
          2. Refer to Sensor I/O Connectors/Sensor Controllers on your OMRON website for details.
*1. Straight type/L-shape type combinations are also available.
*2. The connectors will not rotate after they are connected.
*3. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.