Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

G70V

I/O Relay Terminal

G70V

Our Value Design Products Increase the Value of Your Control Panels. I/O Relay Terminals with 16 Points and Push-In Plus terminal blocks to Downsize Control Panels and Save Labor.

about this Product Family

Coil Ratings (Common to Input/Output per Relay)

Rated voltage
(V)
Rated
current
(mA)
Coil
resistance
(Ω)
Must
operate of
rated voltage
Must
release of rated
voltage
Maximum
voltage of rated
voltage
Power
consumption
(mW)
24 VDC 13.3 1575 80% max. 10% min. 110% Approx. 280

Note:
1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±15% for coil resistance.
2. The operating characteristics are measured at a coil temperature of 23°C.
3. The value for maximum voltage is the maximum value within the allowable voltage fluctuation range for the relay coil’s operating power supply. Continuous operation at this voltage is not within product specifications.
4. The rated current includes the current for the indicators on the I/O Relay Terminal.

Contact Ratings (G2RV-1-S-G I/O Relay)

Item For input For output
Resistive load
(cosφ=1)
Resistive load
(cosφ=1)
Inductive load
(cosφ=0.4 L/R=7 ms)
Rated load 50 mA at 30 VAC
50 mA at 36 VDC
6 A at 250 VAC
6 A at 30 VDC
2.5 A at 250 VAC
2 A at 30 VDC
Rated carry current 50 mA 6 A
Max. switching voltage 30 VAC, 36 VDC 250 VAC, 125 VDC
Max. switching current 50 mA 6 A
Maximum switching capacity --- 1,500 VA
180 W
500 VA
60 W
Error rate
(reference value) *
1 mA at 100 mVDC 10 mA at 5 VDC
Electrical life expectancy 5,000,000 operations min. NO contacts: 70,000 operations min.
NC contacts: 50,000 operations min.
Mechanical life expectancy 5,000,000 operations min. 5,000,000 operations min.

* The above values are for a switching frequency of 120 operations/min.

Characteristics

Item G70V-SID16P(-1)
(Input, DC coil)
G70V-SOC16P(-1)
(output, DC coil)
Contact form SPST-NO × 16 SPDT×16
Contact material Ag alloy + Au plating Ag alloy
Contact resistance *1 150 mΩ max.
Must Operate time *2 20 ms max.
Release time *2 40 ms max.
Max.
switching
frequency
Mechanical limit 18,000 operations/hour
At rated load 1,800 operations/hr (under rated load)
Insulation resistance 100 MΩ min.
Dielectric strength Between coil and contacts: 2,500 VAC for 1 min
Vibration resistance 100 m/s2
Shock resistance 100 m/s2, 3 times each in 6 directions along 3 axes
Noise immunity Noise level: 1.5 kV; pulse width: 100 ns to 1 μs
Ambient operating
temperature
-40 to 55°C (with no icing or condensation)
Ambient operating humidity 35% to 85% RH
LED color Power supply Green
I/O Yellow
Weight Approx. 350 g Approx. 370 g

Note: The above values are initial values.
*1. Measurement condition: 1 A at 5 VDC.
*2. Ambient temperature: 23°C.

Applicable Standards

• UL 61010-2-201, CAN/CSA-C22.2 No.61010-2-201, TÜV (EN 61810-1)