Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

61F-GP-N[]

Floatless Level Switch (Compact, Plug-in Type)

61F-GP-N[]

Space-saving Design Ideal for Control Panel Downsizing. Easy Maintenance.

Compact Plug-in Models (11-pin Type)

Item General-purpose
Controller
61F-GP-N
High-temperature
Controller
61F-GP-NT
Long-distance Controllers
61F-GP-NL 2KM (for 2 km)
61F-GP-NL 4KM (for 4 km)
Controlling materials
and operating
conditions
For control of
ordinary purified
water or sewage
water
For control of ordinary
purified water or
sewage where
operating ambient
temperature is high.
For control of ordinary purified water in
cases where the distance between sewage
pumps and water tanks or between receiver
tanks and supply tanks is long or where
remote control is required.
Supply voltage 24, 100, 110, 120, 200, 220, 230 or 240 VAC; 50/60 Hz
Operating voltage range 85% to 110% of rated voltage
Interelectrode voltage 8 VAC
Interelectrode current Approx. 1 mA AC max.
Power consumption Approx. 3.5 VA max.
Interelectrode operate
resistance
0 to approx. 4 kΩ 0 to approx. 4 kΩ 0 to approx. 1.3 kΩ (for 2 km)
0 to approx. 0.5 kΩ (for 4 km)
Interelectrode release
resistance
Approx. 15 k to ∞ Ω Approx. 15 k to ∞ Ω 4 k to ∞ Ω (for 2 km)
2.5 k to ∞ Ω (for 4 km)
Response time Operate:80 ms max.
Release:160 ms max.
Cable length *1 1 km max. 600 m max. 2 km max.
4 km max.
Control output 1 A, 250 VAC (Inductive load: cosφ = 0.4)
3 A, 250 VAC (Resistive load)
Ambient temperature Operating:-10 to 55°C (-10 to 70°C for high-temperature controller)
Ambient humidity Operating:45% to 85% RH
Insulation resistance
*2
100 MΩ min. (at 500 VDC)
Dielectric strength *2 2000 VAC, 50/60 Hz for 1 min.
Life expectancy Electrical: 100,000 operations min.
Mechanical: 5,000,000 operations min.
Weight Approx. 155 g
Accessories Hold-down clip PFC-N8
Approved standards UL508, CSA C22.2 No.14, EN61010-1, EN61326-1 Industrial electromagnetic environment

Item High-sensitivity
Controller
61F-GP-NH *4
Low-sensitivity
Controller
61F-GP-ND
Two-wire Controller
61F-GP-NR
Controlling materials
and operating
conditions
For control of liquids with
high specific resistance
such as distilled water
For control of liquids with low
specific resistance such as
salt water, sewage water, acid
chemicals, alkali chemicals
For control of ordinary purified
water or sewage water used in
combination with Two-wire
Electrode Holder (incorporating
a resistor of 6.8 kΩ)
Supply voltage 24, 100, 110, 120, 200, 220, 230 or 240 VAC; 50/60 Hz
Operating voltage range 85% to 110% of rated voltage
Interelectrode voltage 8 VAC
Interelectrode current Approx. 0.12 mA AC max. Approx. 1 mA AC max.
Power consumption Approx. 3.5 VA max.
Interelectrode operate
resistance
Approx. 10 kΩ to
approx. 40 kΩ *3
0 to approx. 1.3 kΩ 0 to approx. 2 kΩ
Interelectrode release
resistance
Approx. 100 k to ∞ Ω Approx. 4 k to ∞ Ω Approx. 15 k to ∞ Ω
Response time Operate:80 ms max.
Release:160 ms max.
Cable length *1 50 m max. 1 km max. 800 m max.
Control output 1 A, 250 VAC (Inductive load: cosφ = 0.4)
3 A, 250 VAC (Resistive load)
Ambient temperature Operating:-10 to 55°C (-10 to 70°C for high-temperature controller)
Ambient humidity Operating:45% to 85% RH
Insulation resistance *2 100 MΩ min. (at 500 VDC)
Dielectric strength *2 2000 VAC, 50/60 Hz for 1 min.
Life expectancy Electrical: 100,000 operations min.
Mechanical: 5,000,000 operations min.
Weight Approx. 155 g
Accessories Hold-down clip PFC-N8
Approved standards UL508, CSA C22.2 No.14, EN61010-1, EN61326-1 Industrial electromagnetic environment

*1. The length when using completely insulated, 600-V, 3-conductor (0.75 mm2) cabtire cables. Usable cable lengths will
       become shorter as the cable diameter or number of conductors becomes larger. For details, refer to Safety
       Precautions for Floatless Level Controllers.
*2. The insulation resistance and dielectric strength indicate values between power terminals and Electrode terminals,
       between power terminals and contact terminals, and between Electrode terminals and contact terminals. For details,
       refer to Safety Precautions for Floatless Level Controllers.
*3. Possible to use with 15 kΩ or less, however, this may cause reset failure.
*4. 61F-GP-NH High-sensitivity Controller uses advanced operation.
       When the power supply voltage is applied, if there are some liquids between the electrodes (ground and operation
       electrodes), the internal relay will not operate.
       When the power supply voltage is applied, if there are no liquids between the electrodes (ground and operation
       electrodes), the internal relay will operate.
       If the advanced operation does not satisfy applications, consider using 61F-N8HY controller which uses sequential
       operation.

Compact Plug-in Models (8-pin Type)

Item General-purpose
Controller
61F-GP-N8
61F-GP-N8Y
*4
Long-distance
Controllers
61F-GP-N8L 2KM (for 2 km)
61F-GP-N8L 4KM (for 4 km)
High-sensitivity
Controllers
61F-GP-N8H
61F-GP-N8HY
*4
Controlling materials
and operating
conditions
For control of ordinary
purified water or sewage
water
For control of ordinary purified
water in cases where the distance
between sewage pumps and water
tanks or between receiver tanks
and supply tanks is long or where
remote control is required.
For control of liquids with
high specific resistance
such as distilled water
Supply voltage 24, 100, 110, 120, 200, 220, 230 or 240 VAC; 50/60 Hz
Operating voltage range 85% to 110% of rated voltage
Interelectrode voltage 8 VAC 24 VAC
Interelectrode current Approx. 1 mA AC max. Approx. 0.4 mA AC max.
Power consumption Approx. 3.5 VA max.
Interelectrode operate
resistance
0 to approx. 4 kΩ 0 to 1.3 kΩ (for 2 km)
0 to 0.5 kΩ (for 4 km)
Approx. 15 kΩ to
approx. 70 kΩ *3
Interelectrode release
resistance
Approx. 15 k to ∞ Ω 4 k to ∞ Ω (for 2 km)
2.5 k to ∞ Ω (for 4 km)
Approx. 300 k to ∞ Ω
Response time Operate: 80 ms max.
Release: 160 ms max.
Cable length *1 1 km max. 2 km max.
4 km max.
50 m max.
Control output 1 A, 250 VAC (Inductive load: cosφ = 0.4)
3 A, 250 VAC (Resistive load)
Ambient temperature Operating: -10 to 55°C
Ambient humidity Operating: 45% to 85% RH
Insulation resistance *2 100 MΩ min. (at 500 VDC)
Dielectric strength *2 2000 VAC, 50/60 Hz for 1 min.
Life expectancy Electrical: 100,000 operations min.
Mechanical: 5,000,000 operations min.
Weight Approx. 155 g
Accessories Hold-down clip PFC-N8
Approved standards UL508, CSA C22.2 No.14, EN61010-1, EN61326-1 Industrial electromagnetic environment

Item Low-sensitivity
Controller
61F-GP-N8D
Two-wire Controller
61F-GP-N8R
Variable Sensitivity Controller
61F-GP-N8-V50
Controlling materials
and operating
conditions
For control of liquids
with low specific
resistance such as salt
water, sewage water,
acid chemicals, alkali
chemicals
For control of ordinary
purified water or sewage
water used in combination
with Two-wire Electrode
Holder (incorporating a
resistor of 6.8 kΩ)
For control of cases where variable
sensitivity control is required such as
detection of froth on the surface of a
liquid, control of soil moisture content,
or detection of degree of water
pollution
Supply voltage 24, 100, 110, 120, 200, 220, 230 or 240 VAC;
50/60 Hz
24, 110, 220 or 240 VAC; 50/60 Hz
Operating voltage range 85% to 110% of rated voltage
Interelectrode voltage 8 VAC 24 VAC
Interelectrode current Approx. 1 mA AC max. Approx. 3 mA AC max.
Power consumption Approx. 3.5 VA max.
Interelectrode operate
resistance
0 to approx. 1.3 kΩ 0 to approx. 2 kΩ 0 to 50 kΩ (Variable)
Interelectrode release
resistance
Approx. 4 k to ∞ Ω Approx. 15 k to ∞ Ω Operating resistance +50 kΩ max.
Response time Operate: 80 ms max.
Release: 160 ms max.
Cable length *1 1 km max. 800 m max. 50 m max.
Control output 1 A, 250 VAC (Inductive load: cosφ = 0.4)
3 A, 250 VAC (Resistive load)
Ambient temperature Operating: -10 to 55°C
Ambient humidity Operating: 45% to 85% RH
Insulation resistance *2 100 MΩ min. (at 500 VDC)
Dielectric strength *2 2000 VAC, 50/60 Hz for 1 min.
Life expectancy Electrical: 100,000 operations min.
Mechanical: 5,000,000 operations min.
Weight Approx. 155 g
Accessories Hold-down clip PFC-N8
Approved standards UL508, CSA C22.2 No.14, EN61010-1, EN61326-1 Industrial electromagnetic environment

*1. The length when using completely-insulated, 600-V, 3-conductor (0.75 mm2) cabtire cables. Usable cable lengths will
       become shorter as the cable diameter or number of conductors becomes larger.
*2. The insulation resistance and dielectric strength indicate values between power terminals and Electrode terminals,
       between power terminals and contact terminals, and between Electrode terminals and contact terminals.
*3. Possible to use with 15 kΩ or less, however, this may cause reset failure.
*4. 61F-GP-N8H/-N8Y High-sensitivity Controllers use advanced operation.
       When the power supply voltage is applied, if there are some liquids between the electrodes (ground and operation
       electrodes), the internal relay will not operate.
       When the power supply voltage is applied, if there are no liquids between the electrodes (ground and operation
       electrodes), the internal relay will operate.
       If the advanced operation does not satisfy applications, consider using 61F-N8HY controller which uses sequential
       operation.