Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

E3ZM

Compact Photoelectric Sensor with Stainless Steel Housing

E3ZM

Stainless Steel Housing Ideal for Food Industry (PAT Pending)

about this Product Family

Sensors

Sensing
method
Appearance Connection
method
Sensing
distance
Model
NPN output PNP output
Through-
beam
(Emitter +
Receiver)
1764_lu_1_1
Pre-wired (2 m) 15 m
(Infrared light)
E3ZM-T61 2M
Emitter E3ZM-T61-L 2M
Receiver E3ZM-T61-D 2M
E3ZM-T81 2M
Emitter E3ZM-T81-L 2M
Receiver E3ZM-T81-D 2M
Connector
(M8, 4 pins)
E3ZM-T66
Emitter E3ZM-T66-L
Receiver E3ZM-T66-D
E3ZM-T86
Emitter E3ZM-T86-L
Receiver E3ZM-T86-D
Pre-wired (2 m) 0.8 m
(apertures
built in)
(Infrared light)
E3ZM-T63 2M
Emitter E3ZM-T63-L 2M
Receiver E3ZM-T63-D 2M
E3ZM-T83 2M
Emitter E3ZM-T83-L 2M
Receiver E3ZM-T83-D 2M
Connector
(M8, 4 pins)
E3ZM-T68
Emitter E3ZM-T68-L
Receiver E3ZM-T68-D
E3ZM-T88
Emitter E3ZM-T88-L
Receiver E3ZM-T88-D
Retro-
reflective
with MSR
function
1764_lu_1_2
*1
Pre-wired (2 m) 4 m (100 mm)
*2
(Using
E39-R1S)
(Red light)
E3ZM-R61 2M E3ZM-R81 2M
Connector
(M8, 4 pins)
E3ZM-R66 E3ZM-R86
Diffuse-
reflective
1764_lu_1_3
Pre-wired (2 m) 1 m
(Infrared light)
E3ZM-D62 2M E3ZM-D82 2M
Connector
(M8, 4 pins)
E3ZM-D67 E3ZM-D87
BGS
reflective
(fixed
distance)
1764_lu_1_4
Pre-wired (2 m) 10 to 100 mm
(Red light)
E3ZM-LS61H 2M E3ZM-LS81H 2M
Connector
(M8, 4 pins)
E3ZM-LS66H E3ZM-LS86H
Pre-wired (2 m) 10 to 150 mm
(Red light)
E3ZM-LS62H 2M E3ZM-LS82H 2M
Connector
(M8, 4 pins)
E3ZM-LS67H E3ZM-LS87H
Pre-wired (2 m) 10 to 200 mm
(Red light)
E3ZM-LS64H 2M E3ZM-LS84H 2M
Connector
(M8, 4 pins)
E3ZM-LS69H E3ZM-LS89H

*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.

Accessories (Order Separately)

Reflectors

(A Reflector is required for each Retro-reflective Sensor: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)

Name E3ZM-R
Sensing distance *
Model Quantity Remarks
Rated value Reference value
Reflector 3 m (100 mm) --- E39-R1 1 Reflectors are not provided
with Retro-reflective models.
•The MSR function is enabled.
4 m (100 mm) --- E39-R1S 1
--- 5 m (100 mm) E39-R2 1
--- 2.5 m (100 mm) E39-R9 1
--- 3.5 m (100 mm) E39-R10 1
Fog Preventive Coating --- 3 m (100 mm) E39-R1K 1
Small Reflector --- 1.5 m (50 mm) E39-R3 1
Tape Reflector --- 700 mm (150 mm) E39-RS1 1
--- 1.1 m (150 mm) E39-RS2 1
--- 1.4 m (150 mm) E39-RS3 1

Note: If you use the Reflector at any distance other than the rated distance, make sure that the stability indicator lights
          properly when you install the Sensor.
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.

Mounting Brackets

A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required.

Appearance Model
(Material)
Quantity Remarks
1764_lu_3_1
E39-L153
(SUS304) *1
1 Mounting Brackets
1764_lu_3_2
E39-L104
(SUS304) *1
1
1764_lu_3_3
E39-L43
(SUS304) *2
1 Horizontal Mounting Bracket
1764_lu_3_4
E39-L142
(SUS304) *2
1 Horizontal Protective Cover Bracket
1764_lu_3_5
E39-L44
(SUS304)
1 Rear Mounting Bracket
1764_lu_3_6
E39-L98
(SUS304) *2
1 Metal Protective Cover Bracket
1764_lu_3_7
E39-L150
(SUS304)
1 set (Sensor adjuster)
Easily mounted to the aluminum frame rails of conveyors and
easily adjusted.
For left to right adjustment
1764_lu_3_8
E39-L151
(SUS304)
1 set
1764_lu_3_9
E39-L144
(SUS304) *2
1 Compact Protective Cover Bracket

Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired
       Connector models.
*2. Cannot be used for Standard Connector models.

Sensor I/O Connectors (Sockets on One Cable End)

(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Size Cable Appearance Cable type Model
M8 (4 pins) *1 Standard Straight *2
1764_lu_4_1
2 m 4-wire XS3F-M421-402-A
5 m XS3F-M421-405-A
L-shaped *2 *3
1764_lu_4_2
2 m XS3F-M422-402-A
5 m XS3F-M422-405-A

Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.
*1. Cable specifications: Outer coating material: PVC, Nut material: Stainless steel, Degree of protection: IP67 (IEC
       60529)
*2. The connector will not rotate after connecting.
*3. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.